BeagleBone Blue Bricked

[jonn...@gmail.com]

i posted this on element14 as well as the Google forum and thought I might have some luck here.

So, I loaded the latest Debian image for the Beaglebone boards, Debian 9.5 2018-10-07 4GB SD LXQT, and was using this for a short bit, but for some reason after trying to run a QT compiled program via remote ssh, the BBBlue froze and will not boot any more.  I powered off the board and when it powers on only the Green and Red LEDS from the status bank stay constantly on and the Battery LEDs flash a bit but then 2 stay on constantly; CHG and the one labeled 75.

I have removed all of the EduMIP connections from the board as well as a n LCD that was connected but still nothing happens.  This board does not have the FTDI connections like the Black so I do not have a way to get a console to it to see if it is locking up somewhere.  

 

I've tried removing the uSD card as well as use a known good one but still no luck. 

 

This board was running fine for sometime now so I am not sure what happened.  It was not until I loaded the new image that I ran into an issue.

 NOTE: I did do a 'apt-get install dist-upgrade' which put the Debian version at 9.6 so I am not sure if that caused an issue but I can not see it causing a bricked board. 

Anyone else run into this issue with the Blue?

Cheers,

Jon