beaglebone boot button not working

51 views
Skip to first unread message

daniel

unread,
Aug 8, 2014, 8:07:19 AM8/8/14
to beagl...@googlegroups.com
i recently got my beaglebone black rev c and tried to boot from the sd card by holding down the boot button. the power light comes on but thats it, theres no other activity. the board will boot from the sd card just fine if i dont hold down the button when it turns on. im using a 5v 3 amp adapter to power the board and there are no devices plugged into the board. is this a defective unit?

Gerald Coley

unread,
Aug 8, 2014, 8:27:42 AM8/8/14
to beagl...@googlegroups.com
Based on what you have said. All the button does is change the boot mode. If it boots from the SD fine without the button, then unless you changed the eMMC contents  it is most likely booting from eMMC and not the SD card. You need to see where it is booting from by not using the SD card and seeing if it boots. If it does, then that means it is booting from eMMC and then most likely your SD card is not made correctly or is bad.

Gerald





On Fri, Aug 8, 2014 at 7:07 AM, daniel <silverw...@gmail.com> wrote:
i recently got my beaglebone black rev c and tried to boot from the sd card by holding down the boot button. the power light comes on but thats it, theres no other activity. the board will boot from the sd card just fine if i dont hold down the button when it turns on. im using a 5v 3 amp adapter to power the board and there are no devices plugged into the board. is this a defective unit?

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

William Pretty Security

unread,
Aug 8, 2014, 9:49:19 AM8/8/14
to beagl...@googlegroups.com

Hi;

 

Sounds to me like them onboard emmc wasn’t flashed.

There are plenty of instructions and images on the beaglebone site.

Assuming you want to boot from emmc or just keep booting from uSD.

 

Bill

 

"No one could make a greater mistake than he who did nothing because he could do only a little."

"All that is necessary for the triumph of evil is that good men do nothing" Edmond Burke (1729 - 1797)

http://www.packtpub.com/building-a-home-security-system-with-beaglebone/book

--

For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4744 / Virus Database: 3986/8000 - Release Date: 08/07/14


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4716 / Virus Database: 3986/7978 - Release Date: 08/04/14

Reply all
Reply to author
Forward
0 new messages