[beagleboard]

[Ross Morrison]

Hi all,

Just started working with the Pocketbeagle.

I'm trying to get some overlays to work, BB-I2C1 and 2, BB-UART4 and
BB-SPIDEV0. dmesg shows no evidence of them loading or any errors trying
to load them.

Any special magic using the overlays for these new little boards?

Image I'm using:

root@pocketbeagle:/# cat ID.txt
BeagleBoard.org Debian Image 2017-10-04

Fabulous board, thanks Beagleboard Org team for bringing this one to life!!!

--
Ross Morrison
Electronics International Inc
(541) 318-6060

[Ross Morrison]

Sorry for not putting anything in the subject line.

[Robert Nelson]

On Fri, Oct 6, 2017 at 3:43 PM, Ross Morrison <ro...@buy-ei.com> wrote:
> Hi all,
>
> Just started working with the Pocketbeagle.
>
> I'm trying to get some overlays to work, BB-I2C1 and 2, BB-UART4 and
> BB-SPIDEV0. dmesg shows no evidence of them loading or any errors trying to
> load them.

Well those are enabled by default..

>
> Any special magic using the overlays for these new little boards?
>
> Image I'm using:
>
> root@pocketbeagle:/# cat ID.txt
> BeagleBoard.org Debian Image 2017-10-04
>
> Fabulous board, thanks Beagleboard Org team for bringing this one to life!!!

Here's some examples:

https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/PB-I2C1-RTC-CLICK.dts

https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/PB-SPI0-ETH-CLICK.dts

https://github.com/beagleboard/pocketbeagle/wiki/mikroBus%E2%84%A2-Click-Boards

https://github.com/beagleboard/pocketbeagle/wiki/Peripherals

Regards,

--
Robert Nelson
https://rcn-ee.com/