Is it possible to flash bone80 onto Debian 8

[maxmike]

Just got into infinite trouble - need to use industrial temp boards for production and I thought I could
flash the bone80 production image onto these machines, but no joy.
They use Linux beaglebone 4.4.68-ti-r110 #1 SMP Wed Jun 21 04:31:35 UTC 2017 armv7l GNU/Linux
and the flashing process doesn't even start.
Is this a hardware incompatibility or software problem?

[maxmike]

I cannot use the existing image because I have a need to allow users to dynamically change the ip address of a
machine depending on installation parameters and this is really difficult to script with connman, unlike the old network
manager. Replacing connman has not worked - some critical files are overwritten.

[Robert Nelson]

Yes, documented here

http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Kernel_Options

Regards,

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f7dee85a-6275-43c0-bd8b-5838627773a5%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Robert Nelson]

So remove connman.

And use /etc/network/interfaces like you used to..

Regards,

--

For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscribe@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/edfddeaf-4e1c-4b35-bbb9-acfbb34850dd%40googlegroups.com.