Could I get CDC NCM driver for windows 10 (BeagleBone AI)

[jis...@gmail.com]

My device manager of windows 10 cannot load CDC NCM driver when connect usb with BeagleBone Black.

When I connect WIndos10 by USB cable with BeagleBone AI, But i cannot send ping 8.8.8.8 byte.  

I cannot use network of beagleBone AI,  Just I wanna to use USB Network with CDC NCM (USB Network Driver) .

But My windows10(PC) cannot load CDC NCM driver on Device Manger.

Could i provide CDC NCM driver for windows10.

Thanks

Regards

Jisu 

 

[Dennis Lee Bieber]

On Sat, 11 Jul 2020 17:15:21 -0700 (PDT), in
gmane.comp.hardware.beagleboard.user

jisu.au-Re5JQEe...@public.gmane.org wrote:

>My device manager of windows 10 cannot load CDC NCM driver when connect usb
>with BeagleBone Black.

To my knowledge, Windows uses RNDIS, not CDC (note: my system, with
both a BBB and a BBAI connected, shows two "CDC ECM" failure to load, and
under network adapters shows "Linux USB Ethernet/RNDIS Gadget" [the BBB]
and "Remote NDIS Compatible Device #2")

>
>When I connect WIndos10 by USB cable with BeagleBone AI, But i cannot send
>ping 8.8.8.8 byte.

You are unclear... WHICH device are you entering that command on.

>I cannot use network of beagleBone AI, Just I wanna to use USB Network
>with CDC NCM (USB Network Driver) .

So far as I know, CDC drivers are not available for Windows.

If, from the Windows computer, you can get a result from pinging the BB
you have a working Windows<>BB connection.

However -- by default -- Windows does NOT gateway traffic from client
devices to ITS network connection. You have to enable/configure "Internet
Connection Sharing" to route from the beagle network adapter to the host
computer Internet adapter. I can't help with that -- I connect Beagles to
my router using Ethernet cables...


--
Dennis L Bieber