No voltage registered on sys_5v pin

[collin...@gmail.com]

While attempting to connect an SiK telemetry radio (the old 3dr) I became aware that I do not have any voltage reading on the SYS_5V pin. I've check both, number 8 and 9 and the same issue. On the VDD_3V3 and VDD_5V pins I only have 1.5 volts. I've read through the documentation and it states that SYS_5V should have a voltage reading, even when using a USB cable. I should have plenty of juice, i'm using a 5V-5A power supply.

What could be causing this? I have not seen anything saying the pins need to be "activated" or something like that. Otherwise the board seems to be working fine, I have no boot up issues and have even used the BBB to command a RoboClaw motor controller successfully.

[Gerald Coley]

Is the power LED on?

Gerald

On Wed, Dec 14, 2016 at 8:27 PM, <collin...@gmail.com> wrote:

While attempting to connect an SiK telemetry radio (the old 3dr) I became aware that I do not have any voltage reading on the SYS_5V pin. I've check both, number 8 and 9 and the same issue. On the VDD_3V3 and VDD_5V pins I only have 1.5 volts. I've read through the documentation and it states that SYS_5V should have a voltage reading, even when using a USB cable. I should have plenty of juice, i'm using a 5V-5A power supply.

What could be causing this? I have not seen anything saying the pins need to be "activated" or something like that. Otherwise the board seems to be working fine, I have no boot up issues and have even used the BBB to command a RoboClaw motor controller successfully.

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d640f7ae-87f2-4e80-b952-738636b40436%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Gerald

 

ger...@beagleboard.org

http://beagleboard.org/

gco...@emprodesign.com

[lorriane...@yahoo.com]

--------------------------------------------
On Thu, 12/15/16, Gerald Coley <ger...@beagleboard.org> wrote:

Subject: Re: [beagleboard] No voltage registered on sys_5v pin
To: "beagl...@googlegroups.com" <beagl...@googlegroups.com>
Date: Thursday, December 15, 2016, 4:42 AM

from it, send an email to beagleboard...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BcaiJiWR%2Bgwe7B8sjiM3%2BHewLJH0wmEYrJ%3DhaixzP3ONQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

-1981- Noi greve in Polonia. 16 aug. - S.U.A. anunta inceputul producerii bombei cu neutroni. - Continua razboiul dintre Iran si Irak. Demonstratii pacifiste in Europa Occidentala. 6 oct. - Asasinarea lui Anwar El Sadat 1918-1981 de catre un fanatic. 13 dec. - Introducerea starii de urgenta in Polonia. Interzicerea Solidaritatii . Liderul sau Lech Walesa este arestat.