Skip to first unread message
jennifer Dsilva
Dec 21, 2019, 3:49:02 AM12/21/19
to BeagleBoard
Hi sir...
we have connected to motor to one pwm and gpio.Once linux starts from spl its start running and stops once kernel starts.
we want to disable all these gpios. We tried disabling through device tree. its not stopping.how to disable that so that it should not run during booting process,it should run only if we configure in our application.
we want to disable all these gpios. We tried disabling through device tree. its not stopping.how to disable that so that it should not run during booting process,it should run only if we configure in our application.
Regards,
Jennifer
evilwulfie
Dec 21, 2019, 6:27:48 AM12/21/19
to beagl...@googlegroups.com
Do it in hardware. Isolate the pins
behind some type of tristate buffer
enable buffer when your ready
enable buffer when your ready
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/77385074-a287-4691-affd-6f6a156eda59%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages