Unable to boot via usb_ether

29 views
Skip to first unread message

vishnu...@gmail.com

unread,
Sep 10, 2017, 3:18:36 PM9/10/17
to BeagleBoard

Hi,

I have been trying to tftp boot uImage.

Here is my setup:
BBB is connected via USB cable to host.
UBoot is configured for usb_ether.
Uboot receives IP from DHCP server and loads uImage.
The kernel starts.

However, the booting does not progress further as (I think) NFS is not getting loaded. 
[    1.553308] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[    1.560933] hctosys: unable to open rtc device (rtc0)
[    1.583001] net eth0: initializing cpsw version 1.12 (0)
[    1.588374] net eth0: initialized cpsw ale version 1.4
[    1.593624] net eth0: ALE Table size 1024
[    1.600077] net eth0: phy found : id is : 0x7c0f1
[    1.604893] libphy: PHY 4a101000.mdio:01 not found
[    1.609709] net eth0: phy "4a101000.mdio:01" not found on slave 1, err -19
[    1.622369] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.622036] Waiting up to 110 more seconds for network.
[   21.622035] Waiting up to 100 more seconds for network.
[   31.622025] Waiting up to 90 more seconds for network.
[   41.622038] Waiting up to 80 more seconds for network.
[   51.622028] Waiting up to 70 more seconds for network.
[   61.622023] Waiting up to 60 more seconds for network.
[   71.622032] Waiting up to 50 more seconds for network.
[   81.622023] Waiting up to 40 more seconds for network.
[   91.622025] Waiting up to 30 more seconds for network.
[   96.002045] random: nonblocking pool is initialized
[  101.622030] Waiting up to 20 more seconds for network.
[  111.622026] Waiting up to 10 more seconds for network.
[  121.622030] Waiting up to 0 more seconds for network.
[  121.642057] Sending DHCP requests ...... timed out!
[  210.072933] IP-Config: Retrying forever (NFS root)...
[  210.078089] net eth0: initializing cpsw version 1.12 (0)

Or is this a limitation of my hardware setup - only using IPoverUSB and no real eth connecting host and BBB. Could you kindly suggest me some debugging methods to fix this issue. Thank you!

Best regards,
Vishnu
Reply all
Reply to author
Forward
0 new messages