Hello there,
I have a question regarding usb slave connection to BeagleBone Black. I have designed a system where I connect the D+ and D- wire from mini usb B connector of the BeagleBone Black to the shield board and from there it is put out on a USB B connector (GND too). The problem is the PC doesnt see BeagleBone Black when connecting through that USB. I was wondering- does BeagleBone Black need to see the VCC from USB to know that usb was connected? If yes, this is unconvinient for me, because I would like to prevent BeagleBone Black to be powered through USB. I am able to get a workaround for this using external components but I wonder if this is the case. I would aprichiate any help.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/JVo8L6_A-N4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
-- Bremenpl