Re: [beagleboard] Overlay for using i2c-gpio to create a new I2C bus on BBG?

[Robert Nelson]

On Tue, Oct 3, 2017 at 10:35 AM, tom x <tomx...@gmail.com> wrote:
> Hi,
> I would like to create a gpio-based i2c bus for communicating with an RTC IC
> (unfortunately the pins for the hardware i2c busses are not available for my
> board, only GPIOs are exposed). I have the following device tree overlay.
> The beaglebone will compile and load the overlay, but i2c-gpio is never
> loaded, and i2cdetect -l never detects a new bus. The RTC part is commented
> out for now, I just want to see if I can get a new i2c bus going:

https://groups.google.com/d/msg/beaglebone/DVIkBfdDCSM/tJDvI-BqAQAJ

Regards,

--
Robert Nelson
https://rcn-ee.com/