Ahmad Fatehi
Hello, I used my beaglebone black for a while with usb power. Once I decide to test it with battery and switched it on with a Li-Ion battery and it switched on.But after that when I connect usb to board it doesn't power up and led power blinks! and to run board I first should connect battery to it and it powers up and then I disconnect battery and it continues to run without battery and through usb! How can I solve this problem so that it can run without need to connect battery!?
Ahmad Fatehi
Gerald Coley
The flashing LED indicates that the PMIC is shutting down due to a excess amount of current on power up. Sitting here, I can't recommend a fix as I would need to look at the board to understand the issue. This is not an issue I have run into before.
You could try running it off the DC jack and see what happens there.
Gerald
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
beagleboard...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/c0063923-c73a-4874-8472-f83ff5131b2d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Ahmad Fatehi
Gerald Coley
OK! So, something has to be repaired on the board! You need to get it repaired!
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/dee89c6d-8d0c-49d2-9285-479ec8abc6c3%40googlegroups.com.