[BeagleBone Rev A6]: Starterware ver2.0.0.7 , IAR workbench 6.3 , and build bootloader

[Minh Quốc Đỗ]

I try to build the bootloader project , supported by starterware TI , it builds successfull , and makes 3 files MLO : boot.ini ,boot_ti.ini, and boot.out, I have renamed the file boot_ti.ini to "MLO" , and used the  TI_SDCard_boot_utility_v1_0.exe  to format SD card of beaglebone , and copy this MLO to SD card . When I power on , use terminal to test this boot , nothing happened 

Are there anyone know my issue? Please help me solve it

[Jan Szymanski]

Minh,

 Try the instruction from here http://downloads.angstrom-distribution.org/demo/beaglebone/

How to Unpack and Boot the Demo Image - the hard way

1. Format the SD card using mkcard.txt. For example: sh mkcard.txt /dev/sdX, where X is the drive letter of the SD card. On systems like Ubuntu that would look like 'sudo sh mkcard.txt /dev/sdX'.
2. Copy MLO, u-boot.img and uImage from http://www.angstrom-distribution.org/demo/beaglebone/ to the first partition

The sequence of 2. does matter.

Hope this will help

Jan

[Minh Quốc Đỗ]

Hi Jan , I work with starterware , not with angstrom OS .Anyway thank you

2012/9/11 Jan Szymanski <jan.sz...@uts.edu.au>

--
 
 

--
Đỗ Minh Quốc
Email:minhq...@gmail.com  
         domi...@gmail.com
Phone:(+084)01666037594