Wiznet W5500 ethernet module driver can't install

santosh aiwale

unread,

Jan 16, 2018, 11:51:39 AM1/16/18

to BeagleBoard

The Wiznet W5500 is working on SPI with BBB.

I am working on pocket beagle bone using Linux beaglebone 4.4.91-ti-r133.

here is the driver link https://github.com/borg42/w5x00.

also kernel module build not available.

Robert Nelson

unread,

Jan 16, 2018, 1:01:48 PM1/16/18

to Beagle Board, santos...@gmail.com

This already works out of the box:

see:

https://github.com/beagleboard/pocketbeagle/wiki/mikroBus%E2%84%A2-Click-Boards

* bb-cape-overlays: (minimum version: 4.4.20171005.0-0rcnee1)
* Kernel: (minimum version: 4.4.91-ti-r133/4.9.53-ti-r67/4.14.0-rc3-ti-r2)

Using:

PB-SPI0-ETH-WIZ-CLICK.dtbo
PB-SPI1-ETH-WIZ-CLICK.dtbo

Regards,

--
Robert Nelson
https://rcn-ee.com/

santosh aiwale

unread,

Jan 17, 2018, 12:03:25 AM1/17/18

to BeagleBoard

how to enable it.

santosh aiwale

unread,

Jan 17, 2018, 2:37:02 AM1/17/18

to BeagleBoard

Making Connection with SPI0

and adding uEnv file with uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo and then reboot but not getting boot up with this if remove the module then getting bootup

Robert Nelson

unread,

Jan 17, 2018, 12:05:57 PM1/17/18

to Beagle Board, santosh aiwale

Please provide more information about your board, using this tool:

sudo /opt/scripts/tools/version.sh

Message has been deleted

santosh aiwale

unread,

Jan 18, 2018, 2:32:56 AM1/18/18

to BeagleBoard

git:/opt/scripts/:[d36fe9a7be9ebfc872b10a470e904ab4c61c4516]

eeprom:[A335PBGL00A21741GPB43347]

dogtag:[BeagleBoard.org Debian Image 2017-10-10]

bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2017.09-00002-g0f3f1c7907]

kernel:[4.4.91-ti-r133]

nodejs:[v6.11.4]

uboot_overlay_options:[enable_uboot_overlays=1]

uboot_overlay_options:[uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo]

uboot_overlay_options:[uboot_overlay_addr1=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo]

uboot_overlay_options:[disable_uboot_overlay_emmc=1]

uboot_overlay_options:[disable_uboot_overlay_video=1]

uboot_overlay_options:[disable_uboot_overlay_audio=1]

uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-00A0.dtbo]

uboot_overlay_options:[enable_uboot_cape_universal=1]

pkg:[bb-cape-overlays]:[4.4.20180114.0-0rcnee1~stretch+20180115]

pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee2~stretch+20180104]

pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830]

*** when connecting SPI0 then not geting bootup beagle board

and connecting with SPI1 not communicating

ifconfig result shown

eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500

inet 169.254.136.246 netmask 255.255.0.0 broadcast 169.254.255.255

inet6 fe80::34ad:5dff:fe89:940 prefixlen 64 scopeid 0x20<link>

ether de:ad:be:ef:ca:fe txqueuelen 1000 (Ethernet)

RX packets 0 bytes 0 (0.0 B)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 40 bytes 9097 (8.8 KiB)

TX errors 39 dropped 0 overruns 0 carrier 0 collisions 0

Robert Nelson

unread,

Jan 18, 2018, 11:20:18 AM1/18/18

to Beagle Board, santosh aiwale

Why do you have them both enabled?

SPI1 is for the SPI1 bus (where the device is plugged in on top of the
MicroSD card)

SPI0 is for the SPI0 bus (where the device is plugged in on top of the usb port)

See attached photo:

This would be for:

uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo

IMG_20180118_101749.jpg

santosh aiwale

unread,

Jan 18, 2018, 11:32:00 AM1/18/18

to BeagleBoard

Yes, sir I am trying with singal SPI0 but it's can't work board not booting.

With
uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo

And using SPI1
uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo
It's detect but can't communicate.
If i test ifconfig

eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
inet 169.254.136.246 netmask 255.255.0.0 broadcast 169.254.255.255
inet6 fe80::34ad:5dff:fe89:940 prefixlen 64 scopeid 0x20<link>
ether de:ad:be:ef:ca:fe txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 40 bytes 9097 (8.8 KiB)
TX errors 39 dropped 0 overruns 0 carrier 0 collisions 0

This results Tx errors
And randomly ip changed.

Robert Nelson

unread,

Jan 18, 2018, 11:59:41 AM1/18/18

to Beagle Board, santosh aiwale

Yeah, it works for me:

Grabbed this image:

https://rcn-ee.net/rootfs/bb.org/testing/2018-01-14/stretch-iot/

added

uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo

to /boot/uEnv.txt

then ssh'ed thru the eth0 interface..

debian@beaglebone:~$ sudo ifconfig -a eth0

eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500

inet 192.168.0.149 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::94fb:95ff:fee3:4270 prefixlen 64 scopeid 0x20<link>
ether 96:fb:95:e3:42:70 txqueuelen 1000 (Ethernet)
RX packets 181 bytes 25287 (24.6 KiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 145 bytes 26141 (25.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
git:/opt/scripts/:[b372df3221bb67a9a09c6b89df5110ca32a9e482]
eeprom:[A335PBGL00A21736GPB30111]
model:[TI_AM335x_PocketBeagle]
dogtag:[BeagleBoard.org Debian Image 2018-01-14]
bootloader:[microSD]:[/dev/mmcblk0]:[U-Boot 2018.01-00002-gcc9c2d1992]
kernel:[4.9.76-ti-r91]
nodejs:[v6.12.3]
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg:[bb-cape-overlays]:[4.4.20180104.0-0rcnee1~stretch+20180104]

pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee2~stretch+20180104]
pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830]

dmesg | grep pinctrl-single
[ 1.436073] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
END

santosh aiwale

unread,

Jan 18, 2018, 11:42:57 PM1/18/18

to BeagleBoard

Thanks it's working now.

actually problem was : I didn't connect RST, INT pin and kept floating. Now it's connected and working fine.

One more question is it possible to change RST and INT pin to other port pin?

Graham

unread,

Jan 19, 2018, 5:37:06 PM1/19/18

to BeagleBoard

But it will change the MAC address, every time you load a new image on the memory card.

--- Graham

==

Steven Kronk

unread,

Sep 17, 2018, 6:34:54 PM9/17/18

to BeagleBoard

Hi Robert,

The latest image on the beaglebone images site is 4.14.67-ti-r73, is there someone else I can get a newer kernel version? I tried the link you posted but it says the directory no longer exists?

I also tried flashing some of the images form /rootfs/bb.org/testing/2018-09-16/stretch-iot but they didn't seem to boot up properly.

Robert Nelson

unread,

Sep 17, 2018, 8:56:55 PM9/17/18

to Beagle Board, Steven Kronk

On Mon, Sep 17, 2018 at 5:35 PM Steven Kronk <hesh...@gmail.com> wrote:
>
>
> Hi Robert,
>
> The latest image on the beaglebone images site is 4.14.67-ti-r73, is there someone else I can get a newer kernel version? I tried the link you posted but it says the directory no longer exists?

Well it moved..

https://github.com/beagleboard/pocketbeagle/wiki/Click-boards%E2%84%A2

^ if that link fails just go to:

https://github.com/beagleboard/pocketbeagle/wiki

and look to the right..

> I also tried flashing some of the images form /rootfs/bb.org/testing/2018-09-16/stretch-iot but they didn't seem to boot up properly.

Can you get a me a serial bootlog? I've upgraded the version of u-boot
from v2018.03 -> v2018.09, while i've not seen any regressions on my
farm, it wouldn't be the first..

Reply all

Reply to author

Forward