X15 attempt at SATA boot failed

[mab.mo...@gmail.com]

Hello,

I just tried to set up the X15 for a direct boot from eSATA. I purchaed an external SATA drive and eSATA cable and wrote the latest X-15 debian image to it via dd. I removed the R444 and placed a jumper from J3 1-2 and attempted a boot - FAILED.  The power LED illuminates.  The LED between the power connector and the RAM briefly lights up for a few seconds then goes dark. No activity on the screen and the hard drive does not spin up. Am I missing a step or did I just fry my board?

Thansk

MAB

[Gerald Coley]

Same answer as before.

 

Gerald

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d665dd62-538c-4960-8036-1df7d4173b59%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.