Skip to first unread message
SS Cirrus
May 20, 2020, 4:30:50 AM5/20/20
to BeagleBoard
I have a Beaglebone Black attached to a 7" Newhaven LCD display.
The goal of the device is to show an HTML page on the LCD as soon as possible, and to boot up a Ruby-on-Rails server running on PostgreSQL.
I've read online and tried many things to improve the boot speed - it's still not as good as I'd ideally like.
Here's my bootup information:
systemd-analyze:
Startup finished in 13.669s (kernel) + 53.496s (userspace) = 1min 7.166ssystemd-analyze blame:
1min 5.686s dev-mmcblk1p1.device
12.846s postgresql@9.6-main.service
4.923s networking.service
2.669s systemd-logind.service
2.442s udhcpd.service
2.153s at-hid.service
1.626s generic-board-startup.service
1.554s systemd-udev-trigger.service
1.540s bb-wl18xx-wlan0.service
1.470s wpa_supplicant.service
1.463s connman.service
1.314s sysstat.service
1.076s ssh.service
616ms systemd-update-utmp-runlevel.service
607ms systemd-journald.service
439ms rsyslog.service
380ms sys-kernel-config.mount
360ms kmod-static-nodes.service
338ms sys-kernel-debug.mount
307ms systemd-udevd.service
269ms systemd-user-sessions.service
264ms dev-mqueue.mount
229ms systemd-tmpfiles-setup-dev.service
225ms systemd-sysctl.service
223ms systemd-tmpfiles-setup.service
216ms systemd-update-utmp.service
198ms systemd-journal-flush.service
181ms user@1000.service
168ms hostapd.service
167ms sys-fs-fuse-connections.mount
157ms systemd-remount-fs.service
142ms systemd-random-seed.service
129ms systemd-tmpfiles-clean.service
112ms systemd-backlight@backlight:backlight.service
41ms postgresql.service
dmesg:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.32-ti-r42 (root@a4-imx6q-wandboard-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Thu Apr 5 23:13:09 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c15ecb00, node_mem_map df961000
[ 0.000000] Normal zone: 1148 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon)
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 18 pages/cpu @df925000 s41100 r8192 d24436 u73728
[ 0.000000] pcpu-alloc: s41100 r8192 d24436 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
[ 0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait uboot_detected_capes=BB-BONE-NH7C-01, coherent_pool=1M net.ifnames=0 quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 440800K/522240K available (13312K kernel code, 1166K rwdata, 4364K rodata, 1024K init, 672K bss, 32288K reserved, 49152K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0e00000 (14304 kB)
.init : 0xc1400000 - 0xc1500000 (1024 kB)
.data : 0xc1500000 - 0xc1623854 (1167 kB)
.bss : 0xc162dbb0 - 0xc16d5f9c ( 673 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 42720 entries in 126 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000031] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000040] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000811] timer_probe: no matching timers found
[ 0.001032] Console: colour dummy device 80x30
[ 0.001057] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.001061] This ensures that you still see kernel messages. Please
[ 0.001064] update your kernel commandline.
[ 0.001086] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.046878] pid_max: default: 32768 minimum: 301
[ 0.047148] Security Framework initialized
[ 0.047162] Yama: becoming mindful.
[ 0.047200] AppArmor: AppArmor disabled by boot time parameter
[ 0.047389] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.047399] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.048358] CPU: Testing write buffer coherency: ok
[ 0.048828] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.049351] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.049518] Hierarchical SRCU implementation.
[ 0.052969] EFI services will not be available.
[ 0.053269] smp: Bringing up secondary CPUs ...
[ 0.053280] smp: Brought up 1 node, 1 CPU
[ 0.053290] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.053296] CPU: All CPU(s) started in SVC mode.
[ 0.054845] devtmpfs: initialized
[ 0.069173] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.069589] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.069613] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.073557] xor: measuring software checksum speed
[ 0.110889] arm4regs : 1218.000 MB/sec
[ 0.150878] 8regs : 1092.000 MB/sec
[ 0.190877] 32regs : 1089.000 MB/sec
[ 0.230876] neon : 1749.000 MB/sec
[ 0.230883] xor: using function: neon (1749.000 MB/sec)
[ 0.230902] pinctrl core: initialized pinctrl subsystem
[ 0.231679] DMI not present or invalid.
[ 0.232106] NET: Registered protocol family 16
[ 0.235706] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.258263] omap_hwmod: debugss: _wait_target_disable failed
[ 0.298574] cpuidle: using governor menu
[ 0.304312] OMAP GPIO hardware version 0.1
[ 0.316432] No ATAGs?
[ 0.316450] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.316824] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ 0.316832] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ 0.394895] raid6: neonx2 gen() 1894 MB/s
[ 0.462876] raid6: neonx2 xor() 1432 MB/s
[ 0.462882] raid6: using algorithm neonx2 gen() 1894 MB/s
[ 0.462886] raid6: .... xor() 1432 MB/s, rmw enabled
[ 0.462892] raid6: using neon recovery algorithm
[ 0.469798] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.473064] SCSI subsystem initialized
[ 0.473491] libata version 3.00 loaded.
[ 0.473758] usbcore: registered new interface driver usbfs
[ 0.473810] usbcore: registered new interface driver hub
[ 0.473910] usbcore: registered new device driver usb
[ 0.474435] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 0.475944] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 0.476195] media: Linux media interface: v0.10
[ 0.476260] Linux video capture interface: v2.00
[ 0.476406] pps_core: LinuxPPS API ver. 1 registered
[ 0.476411] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.476430] PTP clock support registered
[ 0.476556] dmi: Firmware registration failed.
[ 0.476977] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 0.477677] Advanced Linux Sound Architecture Driver Initialized.
[ 0.478296] NetLabel: Initializing
[ 0.478305] NetLabel: domain hash size = 128
[ 0.478309] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.478388] NetLabel: unlabeled traffic allowed by default
[ 0.479467] clocksource: Switched to clocksource timer1
[ 0.622954] VFS: Disk quotas dquot_6.6.0
[ 0.623062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.634015] NET: Registered protocol family 2
[ 0.634830] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.634876] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.634933] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.635040] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.635059] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.635264] NET: Registered protocol family 1
[ 0.636055] RPC: Registered named UNIX socket transport module.
[ 0.636064] RPC: Registered udp transport module.
[ 0.636069] RPC: Registered tcp transport module.
[ 0.636073] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.636661] Unpacking initramfs...
[ 0.858086] Freeing initrd memory: 4040K
[ 0.858789] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 0.858990] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 0.860739] audit: initializing netlink subsys (disabled)
[ 0.861876] audit: type=2000 audit(0.860:1): state=initialized audit_enabled=0 res=1
[ 0.862012] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.867652] zbud: loaded
[ 0.870534] NFS: Registering the id_resolver key type
[ 0.870579] Key type id_resolver registered
[ 0.870584] Key type id_legacy registered
[ 0.870598] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.870909] fuse init (API version 7.26)
[ 0.871886] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 0.872079] orangefs_init: module version upstream loaded
[ 0.872086] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.881208] Key type asymmetric registered
[ 0.881222] Asymmetric key parser 'x509' registered
[ 0.881353] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.881603] io scheduler noop registered
[ 0.881610] io scheduler deadline registered
[ 0.881959] io scheduler cfq registered (default)
[ 0.881968] io scheduler mq-deadline registered
[ 0.883656] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.884836] gpio-of-helper ocp:cape-universal: ready
[ 0.886859] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[ 0.889062] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 0.890245] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.893686] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
[ 0.910039] console [ttyS0] enabled
[ 0.912534] omap_rng 48310000.rng: Random Number Generator ver. 20
[ 0.913488] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
[ 0.913604] usbcore: registered new interface driver udl
[ 0.915273] OF: graph: no port node found in /ocp/lcdc@4830e000
[ 0.921609] OF: graph: no port node found in /ocp/lcdc@4830e000
[ 0.928461] OF: graph: no port node found in /ocp/lcdc@4830e000
[ 0.934539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.934544] [drm] No driver support for vblank timestamp query.
[ 0.966605] Console: switching to colour frame buffer device 100x30
[ 0.976716] tilcdc 4830e000.lcdc: fb0: frame buffer device
[ 0.977336] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 1
[ 0.980193] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.980490] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.980692] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.980891] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.984967] libphy: Fixed MDIO Bus: probed
[ 0.985760] CAN device driver interface
[ 1.039545] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ 1.039560] davinci_mdio 4a101000.mdio: detected phy mask fffffffb
[ 1.040024] davinci_mdio: dt: updated phy_id[2] from phy_mask[fffffffb]
[ 1.049347] libphy: 4a101000.mdio: probed
[ 1.049374] davinci_mdio 4a101000.mdio: phy[2]: device 4a101000.mdio:02, driver SMSC LAN8710/LAN8720
[ 1.050343] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:8a:ec:7e
[ 1.050451] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 1.050459] cpsw 4a100000.ethernet: ALE Table size 1024
[ 1.050495] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
[ 1.053115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.053174] ehci-platform: EHCI generic platform driver
[ 1.053360] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.053858] usbcore: registered new interface driver usb-storage
[ 1.056393] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
[ 1.058919] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 1.097875] input: EP0790M09 as /devices/platform/ocp/4819c000.i2c/i2c-2/2-0038/input/input0
[ 1.100783] omap_rtc 44e3e000.rtc: already running
[ 1.101481] omap_rtc 44e3e000.rtc: registered as rtc0
[ 1.102557] i2c /dev entries driver
[ 1.105166] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.105566] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[ 1.106584] cpuidle: enable-method property 'ti,am3352' found operations
[ 1.107041] sdhci: Secure Digital Host Controller Interface driver
[ 1.107047] sdhci: Copyright(c) Pierre Ossman
[ 1.107568] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 1.187854] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.189285] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.189692] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 1.190107] omap-aes 53500000.aes: will run requests pump with realtime priority
[ 1.195391] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 1.198365] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.199223] usbcore: registered new interface driver usbhid
[ 1.199231] usbhid: USB HID core driver
[ 1.199905] remoteproc remoteproc0: wkup_m3 is available
[ 1.208356] wireguard: WireGuard 0.0.20180304 loaded. See www.wireguard.com for information.
[ 1.208368] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 1.209198] NET: Registered protocol family 10
[ 1.210790] Segment Routing with IPv6
[ 1.210884] mip6: Mobile IPv6
[ 1.210898] NET: Registered protocol family 17
[ 1.210914] can: controller area network core (rev 20170425 abi 9)
[ 1.210996] NET: Registered protocol family 29
[ 1.211087] Key type dns_resolver registered
[ 1.211093] mpls_gso: MPLS GSO support
[ 1.211103] NET: Registered protocol family 44
[ 1.211657] omap_voltage_late_init: Voltage driver support not added
[ 1.218531] ThumbEE CPU extension supported.
[ 1.218554] Registering SWP/SWPB emulation handler
[ 1.219618] registered taskstats version 1
[ 1.219776] zswap: loaded using pool lzo/zbud
[ 1.222137] Btrfs loaded, crc32c=crc32c-generic
[ 1.222234] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.247707] mmc1: new high speed MMC card at address 0001
[ 1.248541] mmcblk1: mmc1:0001 S10004 3.56 GiB
[ 1.248976] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
[ 1.249325] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
[ 1.249670] mmcblk1rpmb: mmc1:0001 S10004 partition 3 4.00 MiB
[ 1.250918] mmcblk1: p1
[ 1.266108] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input1
[ 1.266679] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 1.267115] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.267211] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.268871] remoteproc remoteproc0: powering up wkup_m3
[ 1.268971] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[ 1.269232] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 1.269248] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
[ 1.278759] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 1.278799] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 1.279084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.279093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.279101] usb usb1: Product: MUSB HDRC host driver
[ 1.279108] usb usb1: Manufacturer: Linux 4.14.32-ti-r42 musb-hcd
[ 1.279114] usb usb1: SerialNumber: musb-hdrc.1
[ 1.280033] hub 1-0:1.0: USB hub found
[ 1.280091] hub 1-0:1.0: 1 port detected
[ 1.283415] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:53:11 UTC (946687991)
[ 1.283433] of_cfs_init
[ 1.283697] of_cfs_init: OK
[ 1.284372] ALSA device list:
[ 1.284381] No soundcards found.
[ 1.288996] Freeing unused kernel memory: 1024K
[ 13.295366] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.690406] systemd[1]: System time before build time, advancing clock.
[ 13.757106] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.783374] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 13.784230] systemd[1]: Detected architecture arm.
[ 13.785482] systemd[1]: Set hostname to <automator>.
[ 14.344812] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start
[ 14.344846] systemd[1]: sysinit.target: Found dependency on systemd-modules-load.service/start
[ 14.344870] systemd[1]: sysinit.target: Found dependency on at-hid.service/start
[ 14.344888] systemd[1]: sysinit.target: Found dependency on basic.target/start
[ 14.344904] systemd[1]: sysinit.target: Found dependency on sockets.target/start
[ 14.344920] systemd[1]: sysinit.target: Found dependency on dbus.socket/start
[ 14.344936] systemd[1]: sysinit.target: Found dependency on sysinit.target/start
[ 14.783193] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[ 15.288572] systemd-journald[1033]: Received request to flush runtime journal from PID 1
[ 18.603360] random: crng init done
[ 18.957230] configfs-gadget gadget: high-speed config #1: c
[ 19.480556] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 20.292283] net eth0: initializing cpsw version 1.12 (0)
[ 20.384977] SMSC LAN8710/LAN8720 4a101000.mdio:02: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:02, irq=POLL)
[ 20.409978] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 94.715901] pruss 4a300000.pruss: creating PRU cores and other child platform devices
[ 95.659695] remoteproc remoteproc1: 4a334000.pru is available
[ 95.659831] pru-rproc 4a334000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully
[ 95.690793] remoteproc remoteproc2: 4a338000.pru is available
[ 95.690900] pru-rproc 4a338000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully
[ 119.168681] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 119.168784] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 119.259843] 8021q: 802.1Q VLAN Support v1.8
[ 119.259901] 8021q: adding VLAN 0 to HW filter on device eth0Help would be greatly appreciated! Thank you.
Reply all
Reply to author
Forward
0 new messages