Skip to first unread message
Mr John H. Smith
Apr 20, 2015, 2:08:44 PM4/20/15
to beagl...@googlegroups.com
Hello All,
I want to use the BeagleBone Black inside a case, however the ports (USBs, Ethernet and HDMI) are not in the correct places to be connected to the outside world. While I'm comfortable with desoldering the Ethernet and USB connetors to extend those, I'm not so sure about the hdmi. With 19 wires and tighter impedance control can anyone point to an example where some desoldered and extended the port via a cable.
Caio
I want to use the BeagleBone Black inside a case, however the ports (USBs, Ethernet and HDMI) are not in the correct places to be connected to the outside world. While I'm comfortable with desoldering the Ethernet and USB connetors to extend those, I'm not so sure about the hdmi. With 19 wires and tighter impedance control can anyone point to an example where some desoldered and extended the port via a cable.
Caio
evilwulfie
Apr 20, 2015, 2:17:51 PM4/20/15
to beagl...@googlegroups.com
you do that and there is a chance that
nothing will work. you will be playing with the timing of things.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Harvey White
Apr 20, 2015, 3:11:15 PM4/20/15
to beagl...@googlegroups.com
On Mon, 20 Apr 2015 11:17:38 -0700, you wrote:
>you do that and there is a chance that nothing will work. you will be
>playing with the timing of things.
There are active cable extenders and HDMI extenders that might solve
>you do that and there is a chance that nothing will work. you will be
>playing with the timing of things.
the problem. Depends on the amount of space in the case.
I'd also suggest making extender cables if at all possible for USB and
Ethernet. Much easier to unplug and put in a new board than desolder
and hardwire extension connectors to a BBB.
Harvey
>
>
>On 4/20/2015 11:08 AM, Mr John H. Smith wrote:
>> Hello All,
>>
>> I want to use the BeagleBone Black inside a case, however the ports
>> (USBs, Ethernet and HDMI) are not in the correct places to be
>> connected to the outside world. While I'm comfortable with desoldering
>> the Ethernet and USB connetors to extend those, I'm not so sure about
>> the hdmi. With 19 wires and tighter impedance control can anyone point
>> to an example where some desoldered and extended the port via a cable.
>>
>> Caio
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google
>> Groups "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send
>> an email to beagleboard...@googlegroups.com
>> <mailto:beagleboard...@googlegroups.com>.
>
>On 4/20/2015 11:08 AM, Mr John H. Smith wrote:
>> Hello All,
>>
>> I want to use the BeagleBone Black inside a case, however the ports
>> (USBs, Ethernet and HDMI) are not in the correct places to be
>> connected to the outside world. While I'm comfortable with desoldering
>> the Ethernet and USB connetors to extend those, I'm not so sure about
>> the hdmi. With 19 wires and tighter impedance control can anyone point
>> to an example where some desoldered and extended the port via a cable.
>>
>> Caio
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google
>> Groups "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send
>> an email to beagleboard...@googlegroups.com
Reply all
Reply to author
Forward
0 new messages