On Thu, Oct 4, 2012 at 6:25 PM, Zander <
mark.k...@gmail.com> wrote:
> I just installed a new copy of Debian for Beaglebone following the
> instructions at
http://elinux.org/BeagleBoardDebian
>
> The first reboot I got this on the serial console.
>
> ######
> Debian GNU/Linux 6.0 Beagle ttyO0
>
> Debian GNU/Linux 6.0 Beagle ttyO0
>
> Beagle login: Beagle login:
>
> ######
>
> It is impossible to login because it looks like there are 2 getty's running
> at once.
> Has anyone else seen this problem? I did not try to re-install debian from
> scratch to see if it was something I did.
>
>
> The solution was to mount the filesystem on another debian install and
> change the '/etc/inittab' so that there is only one getty for the serial
> line.
>
> ######
> # Example how to put a getty on a serial line (for a terminal)
> #
> T0:23:respawn:/sbin/getty -L ttyO0 115200 vt102
> #T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
>
> # Example how to put a getty on a modem line.
> #
> #T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
>
> T2:23:respawn:/sbin/getty -L ttyO0 115200 vt102
> ######
Hi Zander,
That is strange that happened. So I can fix it, can you expand a
little... What "minimal" image did you use? Or if it was the
"netinstall" script, what was the git-sha and what parameters you
called "mk_mmc.sh".
Regards,
--
Robert Nelson
http://www.rcn-ee.com/