Reason 10.4 Crack Registration Code Download 2019
Bran Cardello
CCM_CALLMANAGER-CALLMANAGER-2-CallManagerFailure : Indicates an internal failure in Unified CM Additional Text [String] Host Name of Hosting Node [String] Host Node IP Address [String] Reason code [Enum]
Recommended Action Monitor for other alarms and restart Cisco CallManager service, if necessary. Collect the core file if available, SDL and CCM/SDI trace files (you can gather these from Trace and Log Central in RTMT using the Collect Files feature) and contact the Cisco Technical Assistance Center (TAC).
CCM_CALLMANAGER-CALLMANAGER-5-SDLLinkISV : SDL link to remote application restored Remote Application IP Address [String] Unique Link ID [String] Local Node ID [UInt] Local Application ID [Enum]Remote Node ID [UInt] Remote Application ID [Enum]
Explanation This alarm indicates that the local Unified CM has gained communication with the remote Unified CM. Note that the remote Unified CM should also indicate SDLLinkISV with a different LinkID.
CCM_CALLMANAGER-CALLMANAGER-1-SDLLinkOOS : SDL link to remote application is out of service Remote Application IP Address [String] Unique Link ID [String] Local Node ID [UInt] Local Application ID [Enum]Remote Node ID [UInt] Remote Application ID [Enum]
Explanation This alarm indicates that the local Unified CM has lost communication with the remote Unified CM. This alarm usually indicates that a node has gone out of service (whether intentionally for maintenance or to install a new load for example; or unintentionally due to a service failure or connectivity failure).
Recommended Action In the Cisco Unified Reporting tool, run a CM Cluster Overview report and check to see if all servers can communicate with the Publisher. Also check for any alarms that might have indicated a CallManager failure and take appropriate action for the indicated failure. If the node was taken out of service intentionally, bring the node back into service.
CCM_CALLMANAGER-CALLMANAGER-1-CMVersionMismatch : One or more Unified CM nodes in a cluster are running different Unified CM versions Remote Application Link Protocol Version [String] Local Application Link Protocol Version [String] Remote Node ID [UInt] Remote Application ID [Enum]Remote Application Version [String]
Explanation This alarm indicates that the local Unified CM is unable to establish communication with the remote Unified CM due to a software version mismatch. This is generally a normal occurrence when you are upgrading a Unified CM node.
Explanation The B-channel indicated by this alarm has gone out of service. Some of the more common reasons for a B-channel to go out of service include: Taking the channel out of service intentionally to perform maintenance on either the near-end or far-end; Losing T1/E1/BRI cable connectivity; When the MGCP gateway returns an error code 501 or 510 for a MGCP command sent from Unified CM; When the MGCP gateway doesn't respond to an MGCP command sent by Unified CM three times; When a speed and duplex mismatch exists on the Ethernet port between Unified CM and the MGCP gateway.
Recommended Action Check the Cisco CallManager advanced service parameter, Change B-channel Maintenance Status to determine if the B-channel has been taken out of service intentionally; Check the Q.931 trace for PRI SERVICE message to determine whether a PSTN provider has taken the B-channel out of service; Check the connection of the T1/E1/BRI cable; Reset the MGCP gateway; Check the speed and duplex settings on the Ethernet port.
Explanation The D-channel indicated by this alarm has gone out of service. Common reasons for a D-channel to go out of service include losing T1/E1/BRI cable connectivity; losing the gateway data link (Layer 2) due to an internal or external problem; or a gateway reset.
Recommended Action Check the connection of the T1/E1/BRI cable; reset the gateway to restore Layer 2 connectivity; investigate whether the gateway reset was intentional. If the reset was not intentional, take steps to restrict access to the Gateway Configuration window in Cisco Unified CM Administration and the gateway terminal.
CCM_CALLMANAGER-CALLMANAGER-4-DeviceTransientConnection : A device attempted to register but did not complete registration Device IP Address [String] Device Name [String] Device MAC Address [String] Protocol [String] Device type [Enum]Reason Code [Enum]Connecting Port [UInt] Registering SIP User [String] IPv6Address [String] IPAddressAttributes [Enum]IPv6AddressAttributes [Enum]
Explanation A connection was established and immediately dropped before completing registration. Incomplete registration may indicate that a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection. Network connectivity problems can affect device registration, or the restoration of a primary Unified CM may interrupt registration.
Recommended Action In the Cisco Unified Reporting tool, check the Active Services section of the Unified CM Cluster Overview report to confirm that any failover/fallback scenarios have completed. Confirm that auto-registration is enabled if the phone attempting to connect is set to auto-register, or locate the phone that is attempting to auto-register if auto-registration has been intentionally disabled. Check the device indicated in this alarm and confirm that the device registration details in Cisco Unified CM Administration are accurate. Also, refer to the reason code definitions in the alarm for recommended actions. No action is required if this event was issued as a result of a normal device rehome.
CCM_CALLMANAGER-CALLMANAGER-3-EndPointTransientConnection : An endpoint attempted to register but did not complete registration Device IP address [String] Device name [String] Device MAC address [String] Protocol [String] Device type [Enum]Reason Code [Enum]Connecting Port [UInt] Registering SIP User [String] IPv6Address [String] IPAddressAttributes [Enum]IPv6AddressAttributes [Enum]LastSignalReceived [String] StationState [String]
Recommended Action Investigate any network connectivity problems in the system. It's possible that you have reached the maximum number of devices; the Cisco CallManager service parameter, Maximum Number of Registered Devices, controls the number of devices allowed in the system. After taking licensing, system hardware and other related concerns into consideration, you could increase the value of the service parameter. Also, refer to the reason code definitions in the alarm for additional recommended actions. No action is required if this event was issued as a result of a normal device rehome.
CCM_CALLMANAGER-CALLMANAGER-6-DeviceRegistered : Device registered Device name [String] Device MAC address [String] Device IP address [String] Protocol [String] Device description [String] User ID [String] Load ID [String] Associated directory numbers [String] Performance monitor object [Enum]Device type [Enum]Configured Gatekeeper Name [String] Technology Prefix Name [String] Zone Information [String] Alternate Gatekeeper List [String] Active Gatekeeper [String] Call Signal Address [String] RAS Address [String] IPV6Address [String] IPAddressAttributes [Enum]IPV6AddressAttributes [Enum]ActiveLoadId [String] InactiveLoadId [String]
CCM_CALLMANAGER-CALLMANAGER-6-EndPointRegistered : Endpoint registered Device name [String] Device MAC address [String] Device IP address [String] Protocol [String] Device description [String] User ID [String] Load ID [String] Associated directory numbers [String] Performance monitor object [Enum]Device type [Enum]IPV6Address [String] IPAddressAttributes [Enum]IPV6AddressAttributes [Enum]ActiveLoadId [String] InactiveLoadId [String]
CCM_CALLMANAGER-CALLMANAGER-4-DevicePartiallyRegistered : A device has partially registered Device name [String] Device MAC address [String] Device IP address [String] Protocol [String] Device description [String] User ID [String] Load ID [String] Associated directory numbers [String] Performance monitor object [Enum]Device type [Enum]ActiveLoadId [String] InactiveLoadId [String]
Recommended Action In the Cisco Unified Reporting tool, run the Unified CM Multi-Line Devices report and check the number of lines that are supposed to be configured on the device identified in this alarm. If the device has registered an inconsistent number of lines compared the Multi-Line report for this device, restart the device so that it can reregister all lines. If this alarm persists, verify that the appropriate number of lines has been configured on the device, and that the appropriate directory numbers have been configured. If the device is a third-party SIP phone, verify that the directory numbers configured on the phone match the directory numbers configured on the device in Unified CM Administration.
CCM_CALLMANAGER-CALLMANAGER-4-DeviceUnregistered : Device unregistered Device name [String] Device MAC address [String] Device IP address [String] Protocol [String] Device type [Enum]Device description [String] Reason Code [Enum]IPV6Address [String] IPAddressAttributes [Enum]IPV6AddressAttributes [Enum]
Explanation A device that has previously registered with Unified CM has unregistered. In cases of normal unregistration with reason code 'CallManagerReset', 'CallManagerRestart', or 'DeviceInitiatedReset', the severity of this alarm is lowered to INFORMATIONAL. A device can unregister for many reasons, both intentional such as manually resetting the device after a configuration change, and unintentional such as loss of network connectivity. Other causes for this alarm could include a phone being registered to a secondary node and then the primary node coming online, which causes the phone to rehome to the primary Unified CM node. Or, lack of a KeepAlive being returned from the Unified CM node to which this device was registered. Unregistration also occurs if Unified CM receives a duplicate registration request for this same device.
b37509886e