Datalogic Memor Driver Windows 7 Download
Keri Hott
How to Install Datalogic Memor Driver on Windows 7
Datalogic Memor is a handheld device that can scan barcodes and perform various tasks. It runs on Windows CE or Android operating systems and can connect to a PC via USB or Wi-Fi. To use Datalogic Memor with a Windows 7 PC, you need to install the appropriate driver and software.
In this article, we will show you how to install the Datalogic Memor driver on Windows 7 using the Datalogic Device Configuration Utility (DXU) Desktop. DXU Desktop is a tool that allows you to configure and update Datalogic devices from your PC. You can download DXU Desktop from here.
Step 1: Download and Install DXU Desktop
Go to the DXU Desktop releases page and download the latest version of DXU Desktop. The file name should be something like DXU_Desktop_v2.1.3.zip. Extract the zip file to a folder on your PC.
Run the DXU_Desktop_v2.1.3.exe file and follow the installation wizard. You can choose whether to install the ADB driver for Android devices and the USBLAN driver for Windows CE devices. If you are not sure, you can leave them checked.
Step 2: Connect Datalogic Memor to PC
Depending on the operating system of your Datalogic Memor device, you need to connect it to your PC in different ways.
- If your Datalogic Memor runs on Windows CE, you need to use a USB cable and enable USBLAN mode on the device. To do this, go to
Start > Settings > Connections > USB to PCand selectEnable advanced network functionality. Then connect the device to your PC using the USB cable.
- If your Datalogic Memor runs on Android, you need to use a USB cable and enable USB debugging mode on the device. To do this, go to
Settings > Developer options > USB debuggingand turn it on. Then connect the device to your PC using the USB cable.
- If your Datalogic Memor supports Wi-Fi, you can also connect it to your PC wirelessly. To do this, make sure both devices are connected to the same Wi-Fi network and note down the IP address of your Datalogic Memor device. You can find it by going to
Settings > About device > Status > IP address.
Step 3: Launch DXU Desktop and Select Device
Open DXU Desktop from your PC and click on Select Device. A window will pop up with a list of available devices. Choose your Datalogic Memor device from the list and click Select. If you are connecting via Wi-Fi, you need to enter the IP address of your device manually.
Step 4: Install Driver and Software
Once you have selected your device, DXU Desktop will show you its information and configuration options. To install the driver and software for your device, click on Install Software. A window will pop up with a list of available software packages for your device. Choose the ones you want to install and click Install. You may need to restart your device after the installation is complete.
Step 5: Test Device Functionality
To test if your device is working properly with your PC, you can use DXU Desktop's features such as Capture Screen, Capture Log, or Edit Configuration. You can also scan barcodes using your device and see if they appear on your PC screen.
Conclusion
In this article, we have shown you how to install the Datalogic Memor driver on Windows 7 using DXU Desktop. We hope this guide was helpful and easy to follow. If you have any questions or issues, please contact Datalogic's support service at d8cbe59d7d