bcm2835

You said it yourself -- get an IDE. I use VS Code - its free and it works very well in C and most

Thank you Mike! I'm going to use a very short delay and do retries trying to read the register.

Sorry for the post I found the discussion already submitted. Cheers, Ken On Thursday, October 31,

Thanks to all . Best regards . kpk On Tue, Sep 10, 2024 at 1:41 PM sn .ymd <cel.rokko.msvi@gmail.

Hello friends ! Here is an old non-professional before you.I had been coding in embedded c for the

The names are not strings and not variables - they are symbols resolved by the macro processor. They

If you imagine the BCM2xxx chip as a typical Integrated Circuit (much like any IC chip often used for

I recently received a copy of "Raspberry Pi IoT in C" by Harry Fairhead, 3rd Edition

Just install a cross-compiler on MacOS For example : https://medium.com/@haraldfernengel/cross-

Hello, The informationwe have is that the __sync_synchronize() are important for ensuring that the

Hi All Ah, that makes sense, thanks for the information. On Monday 12 February 2024 at 02:13:22 UTC

Thanks, your patch is no in the latest version. Needed a little editing, so please check its still OK

Thanks and link has been fixed On Monday, 12 February 2024 01:04:08 AEST Sean ONeill wrote: > Hi

Can I draw attention to: https://www.amazon.com/dp/1871962846 I cannot tell a lie - I was the

Thank you. I included the flag and it worked. Another thing was that I was initially compiling it

Hello You will need to read the bcm2835 library documentation about user privileges Sent from my

Sorry to all subscribers about this spam. The sender has been reported to Google for abuse. On Monday

You need to use wget https://www.airspayce.com/mikem/bcm2835/bcm2835-1.73.tar.gz The browser stores

Technically, you shouldn't need to care any more than what the pin number is. The Hardware

Hi again Simon Can you tell me more about under what circumstances you might get, or do see a timeout

There's too much wrong with your example code to list all the errors. If you're new to the

Thanks for reporting these issues. They have been addressed for the next release. Cheers. On Friday,

The SPI, I2C and SMI modules all return error codes to their respective bcm2835_xxx_begin() functions

The issue was that I was not running as 'root'. Non-root (users) will only be able to access

Added some example code to the readme to adjust the output frequency for a passive buzzer 👍 On Friday

Hi I don't seem to be able to install the bcm2835 code on my Pi, when I run ./config i get "

Hi, As part of my continuing journey in learning how to program GPIO on Raspberry Pis I've

Thanks. I dont see any errors there. Your library has now been built, but not installed in a place

Thanks. This will appear in the next release. Cheers. On Saturday, 19 March 2022 20:13:52 AEST '

Thanks for the report. I will add a note to to the doc. Cheers. On Friday, 11 February 2022 04:39:48