Bay Area RepRap

Hi All, I've got some, sealed in the package, Nylon Carbon Fiber and SR-30 support material (1.75

I am interested in free 3mm filament. Please contact me at frank_worrell @ yahoo.com Thanks, Frank On

1.75mm PLA Filament for Sale Various colors. 20lbs. (9kg) total. $150 for all of it. Contactless

Thanks for the info. My poor old Graber is in a box at the moment and deserves some love. One of

Thank you Avery. I went with the deoxit because I have found there clock lube to be really good. I

We at TSD are doing this too: https://www.thespaghettidetective.com/blog/2020/03/25/3d-printing-

Anyone know of a storefront in the Bay Area where I could buy a nozzle? Or just list any stores

Sometimes this problem can happen due to ground shift, if a lot of current is passing through on

Although I haven't used a resin printer in some time, I have used the Form 1 and Form 1+

Can anyone recommend a good metal shop or anyone with a metal lathe that can machine the ends of 2

https://www.amazon.com/TIANSE-Printer-Filament-Diameter-Tolerance/dp/B01NCRVSF6

Hi Chris, I've been on this list for a while and think I've finally determined what printer

Save 40% on 3D Systems FabPro 3D Printer, just $1999 Save 35% on 3D Systems bundle including the

I only use kapton tape with ABS and clean every once in a while with acetone. I have found about 110C

Reminder that there is a meeting this Wednesday at Maker Nexus at 7pm. You can bring your printers.

Reminder that we will be meeting at a new place tonight, Maker Nexus in Sunnyvale. We will be meeting

Bill, Thank you for the heads-up! I went ahead and bought an Ender 3 to mess around with klipper.

I saw that too! Very cool that Ken got that exposure. On Thursday, May 23, 2019 at 12:22:00 PM UTC-7,

Bill, you beat me to it!!! That's probably it since it's right before the temp settings so it

Hey folks, I am the director of a summer camp in San Francisco at the Jewish Community Center. We are

On May 14, 2019, at 7:35 PM, Walter Hsiao <whs...@gmail.com> wrote: Cool, it looks great,

I'll take it! Send me a PM to discuss pick up. Go Big 3D Printers On May 5, 2019, at 1:27 PM,

Kind folks, Managed to burn out IC U5 on the LCB/Button/SD-reader board of a Rep 2 (details here).

Reminder, the meeting is today at TheShop.build in San Jose at 7pm. As always, the MeetUp is free and

Anybody here going?

Ken, I must be missing something, because it won't let me add a comment and I don't see a

Hi, Reminder that there is a meeting tomorrow night. There will be a swap-meet as well as other sub-

Next Meeting 3/20: This next meeting is one week from tonight at the usual place and time, 7pm at

I will be there if weather permits. On Wed, Mar 6, 2019, 2:32 PM Ken Snyder <ken.s...@gmail.com

Hi Ken, Sounds good. I missed this meeting, but maybe one of the future meetings It will give me an