Bs En 60893 Pdf

0 views

Skip to first unread message

Doretta Castoe

unread,

Aug 5, 2024, 8:31:08 AM8/5/24

to batomaret

Containsthe definitions related to, and the general requirements to be fulfilled by, industrial rigid laminated sheets for electrical purposes, made with any of the following resins as the binder: epoxy (epoxide), melamine, phenolic, polyimide, silicone and unsaturated polyester. The following reinforcements may be used either singly or in combination; cellulosic paper, cotton cloth, glass cloth, glass roving, glass mat, polyester cloth and wood veneers. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. The major changes from the previous edition of IEC 60893-1 are the following: a) new material types have been included; b) changes have been made to the property requirements of some existing types; c) a new method for testing permittivity and dissipation factor has been added; d) all non-specification data for each type has been moved to a new Part 4 of IEC 60893.

License Agreement

This is an agreement between the end user of the Product (\"Licensee\") and Intertek Inform Australia Pty Ltd, Level 37, 680 George Street, Sydney NSW 2000 AUSTRALIA, ABN 14 144 974 087.

1. Definitions and Interpretations

Australian Standards means Australian Standards and includes Joint ISO/Australian Standards, Joint NZ/Australian Standards, current Draft Australian Standards, and amendments to Australian Standards.

Concurrent Users means the maximum number of people able to access the Product at any one time, and is limited to the number of Licenses purchased.

ISO Standards means Standards published by the International Organization for Standardization (ISO), for which Intertek Inform is an authorised distributor.

IEC Standards means Standards published by the International Electrotechnical Commission (IEC), for which Intertek Inform is an authorised distributor.

Internal use means use of the Product within the Licensee's organization.

License means the right to access and use the Product.

Licensee means the purchaser and user of the Product.

Product means Australian Standards, ISO Standards and IEC Standards ordered and purchased through the Intertek Inform.

2. Product Availability

2.1. The Product is available via the World Wide Web through the use of a web browser. Documents are available in various formats. PDF files are viewable through the use of Adobe Reader Version 7 and above although the latest Version may be required and is available at

3. License Agreement

3.1. By using the Product the Licensee agrees to be bound by the License Agreement for the Product.

3.2. The Licensee is granted a non-exclusive and non-assignable License to use the Product.

3.3. Licensees are permitted to use the Product the following extent:

3.3.a. PDF Format - Purchasers of personal user Licenses for the PDF format of the Product may locally install and use the Product on the number of individual computers corresponding to the Quantity specified in the Intertek Inform order. Licensees are permitted to make paper copies of the Product for Internal use limited to the Quantity specified in the Intertek Inform order only ( excludes electronic pads of forms ). Licensees are permitted to make one electronic copy of the Product for backup purposes.

For reproduction of the PDF format of the Product or portions thereof, and for which are outside the circumstances included in this agreement, permission must be sought in writing from Intertek Inform, Copyright Officer at copy...@intertekinform.com .

3.3.b. PDFPlus Format - Purchasers of personal user Licenses for the PDFPlus format of the Product may locally install and use the Product on the number of individual computers corresponding to the Quantity specified in the Intertek Inform order. Licensees are permitted to make paper copies of the Product for Internal use limited to the Quantity specified in the Intertek Inform order only ( excludes electronic pads of forms ). Licensees are permitted to make one electronic copy of the Product for backup purposes.

Licensees are permitted to copy and paste content from the Product into their organisation's internal documents only for internal use only.

3.3.c. Multi User PDF (3) Format - Purchasers of network Licenses for the Multi User PDF (3) format of the Product may install and use the Product on a network with the number of Concurrent Users permitted corresponding to the number of users specified in the Intertek Inform order. Licensees are permitted to make paper copies of the Product for Internal use limited to the number of network users specified in the Intertek Inform order only. Licensees are permitted to make one electronic copy of the Product for backup purposes.

For reproduction of the Multi User PDF (3) format of the Product or portions thereof, and for which are outside the circumstances included in this agreement, permission must be sought in writing from Intertek Inform, Copyright Officer at copy...@intertekinform.com

3.3.d. Hardcopy Format - Purchasers of personal user Licenses for hardcopy formats of the Product are not permitted to make copies of the Product or portions thereof.

For reproduction of hardcopy formats of the Product or portions thereof, and for which are outside the circumstances included in this agreement, permission must be sought in writing from Intertek Inform, Copyright Officer at copy...@intertekinform.com .

3.4. Intertek Inform will not in any way provide the Licensee with an updating service for the Product. The Licensee agrees that Intertek Inform has no obligation whatsoever to advise you of any amendments or changes to the Product or even as to its withdrawal from publication irrespective of the reason for any such amendment, change or withdrawal. Licensee may wish to consider the StandardsWatch updating service at www.saiglobal.com/sw

3.5. It is expressly agreed that the Standards Australia, ISO and IEC retains all title to the intellectual property contained in their respective Product or is an authorized distributor of the intellectual property. Licensees shall not challenge or call into question, ownership of Intellectual Property Rights in respect of the Product.

3.6. The Product, and authorized paper copies of the Product, are the subject of copyright. Unauthorized copying of the Product and any modification of or merger with other software or documents is expressly forbidden. However, in consideration for entering into this license agreement and agreeing to pay the License fees to Intertek Inform, the Licensee may use the Product to obtain information contained in the Product for their own Internal use only but shall not otherwise use, modify, copy, adapt, supply, transmit, send by e-mail, reproduce, or do any other thing in relation to, the Product. The Product may not be copied or circulated electronically, including by electronic mail, even for Internal use.

3.7. The Licensee shall not modify, adapt, translate, reverse engineer, decompile, disassemble or create derivative works based on the Product.

3.8. The Licensee shall ensure that all of the personal users that have rights to access the Product under this License shall exercise that right only for the purposes specified and shall not use the Product for any other purpose.

3.9. The Product is Licensed only to the Licensee. Under no circumstances may the Product be transferred by the Licensee to any other party without the prior written consent of Intertek Inform. Under no circumstances is the Licensee permitted to reproduce material from the Product for external use or for use on any other site or group of sites.

3.10. This License will terminate automatically and without notice if the Licensee fails to comply with any provision of the License. Upon termination the Licensee agrees to destroy all copies of the Product.

3.11. The Licensee acknowledges that no promise, representation, warranty or undertaking (other than any contained in this Agreement) has been given by Intertek Inform or any person or company on its behalf in relation to the profitability of or any other consequences or benefits to be obtained from the use of the Product and the Licensee relies wholly upon his own skill and judgment in deciding to use the Product.

3.12. Intertek Inform shall not be liable to the Licensee or any other person in respect of any loss or damage, however caused which may be suffered or incurred or which may arise directly or indirectly in respect to the Product.

3.13. No warranty is made by any party connected with this Product, express or implied, with regard to the quality, utility or accuracy of the Product and no liability will be accepted for any damage, direct, indirect, special or consequential, arising in any way out of the use of the Product.

This agreement is governed by and must be construed in accordance with the laws of the State of New South Wales, Australia.

For further information and technical support contact:

In Asia Pacific contact:

Intertek Inform Australia

Level 37, 680 George Street

Sydney, NSW, 2000,

Australia

GPO Box 5420

Sydney, NSW, 2001

Australia

Phone: 131 242 (within Australia) +61 2 8206 6010 (outside Australia)

E-mail: sa...@intertekinform.com