Hello cocolocko,
please refer to the fine documentation,
http://doc.bareos.org/master/html/bareos-manual-main-reference.html#x1-700005.9
(5.9 When The Tape Fills)
"To manually relabel the Volume use the following additional steps:
To delete the Volume from the catalog use the delete volume command in the Console and select
the VolumeName (or MediaId) to be deleted.
Use the unmount command in the Console to unmount the old tape.
Physically relabel the old Volume that you deleted so that it can be reused.
Insert the old Volume in the tape drive.
From a command line do: mt -f /dev/st0 rewind and mt -f /dev/st0 weof, where you need to
use the proper tape drive name for your system in place of /dev/st0.
Use the label command in the Console to write a new Bareos label on your tape.
Use the mount command in the Console if it is not automatically done, so that Bareos starts
using your newly labeled tape.
--
Mit freundlichen Grüßen
Philipp Storz
philip...@bareos.com
Bareos GmbH & Co. KG Phone: Phone: +49221630693-92
http://www.bareos.com Fax: +49221630693-10
Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646
Geschäftsführer: Stephan Dühr, M. Außendorf,
J. Steffens, P. Storz, M. v. Wieringen