Eaton Meter Configuration Software

[Claribel Szwaja]

TheDIRIS A-30 is a panel-mounted multifunction power monitoring device for electrical installations.

The device is easy to use thanks to its large backlit LCD display and 6 keys used to view readings and configuration.

Compatible with 1A or 5A secondary CTs.

Over/under limit alarms on all parameters can be confgured to detect drifts in measurements.

Additional communication, input/output and memory modules can extend the basic functional scope of the DIRIS A-30. Equipped with additional modules, the device can provide the user with flexibility and expandability throughout its service life.

The DIRIS A-30 can be equipped with additional modules that give the user flexibility throughout the service life of the product. Communication modules and additional digital or analogue inputs/outputs can be used to increase its range of functionality.

Reference standard for PMDs (Performance metering & monitoring devices), IEC 61557-12 guarantees performance levels and satisfactory performance from the PMDs under the environmental conditions typical of industrial and service applications.

This year marks the Sixth Annual Product of the Year Awards. Different from years past when judges were invited to our office, the CSE staff invited professional engineers from around the country to participate in our annual evaluation of the best products released during 2009 in a digital forum.

Initially, our judges were apprehensive about undertaking such a time consuming task of evaluating and judging products from manufacturers all around the country. Ironically, after the judging was complete, and all the scores were tallied, the overwhelming feedback from our judges was a feeling of gratitude for exposing them to such innovative and trendsetting products.

Combiner box

The Cooper Bussmann Combiner boxes meet solar power circuit protection requirements while offering a selection from three series, all with fuses preinstalled when specified and including finger-safe modular fuse holders. The ETL-Listed to UL 1741 Standard combiner box includes 4 to 24 input circuits and is configured for both positive and negative grounded arrays. The device features single or dual 167 F output terminals and steel or fiberglass NEMA 3, 3R, 4, or 4X enclosures with seamless door gaskets. www.cooperbussmann.com #1

Lighting panelboard

The Pow-R-Line 1aF and 2aF lighting panelboards from Eaton are designed for selectively coordinated system applications where high fault current levels are present. The panelboards incorporate Class CC fuses for branch circuit protection, and when applied with the appropriate upstream fuses, selective coordination ratings may be achieved for available fault currents at the panel of us to 200,000 AIC. The fuses are coupled with breakers on the line side of the fuse, and each fuse is enclosed in a fuse holder that is factory connected from the line-side breaker. www.eaton.com #2

Elevator control panelboard

The elevator control panelboard from Eaton is designed to meet requirements mandated by building codes for fire protection and safety within elevator shafts. Designed for installations with a single feeder to multiple elevators within the same elevator core, the panelboard is built on the Cutler-Hammer Pow-R-Line 4F panelboard chassis. The device features 30-200A, 240 Vac, and 600 Vac fused switches to feeder elevator, 200,000 A rms short-circuit current rating, 120 Vac shunt trip, and Class J fuse clips. www.eaton.com #3

Busway

The Pow-R-Flex low ampere busway from Eaton features an extruded aluminum housing, two standard color options, shutter mechanism safe plug-in outlets, integral ground path, high short-circuit withstand ratings, and a variety of plug-in units. The straight sections of the plug-in busway are available in 2 to 10 ft increments. The device meets NEMA, UL, CS, and ISO requirements, and the Pow-R-Bridge joint assembly and torque-indicating bolt provide a secure connection. www.eaton.com #4

Grounded relay

The PGR-5330 advanced ground-fault and resistor-monitoring relay from Littelfuse Inc. provides both ground-fault detection and continuous monitoring of the neutral-to-ground path to ensure the integrity of the resistor. The device is communications enabled with a standard RS-232 interface and optional DeviceNet, Profibus, and Ethernet ports. The device can be applied to high- and low-resistance grounded transformers and generators, and the device features wide setpoint ranges compatible with any neutral connected NGR up to 35 kW system voltage. www.littelfuse.com #5

UPS

The MGE Galaxy 3500 from APC Schneider Electric features factory-installed hot swappable batteries and electronics to reduce installation time. The device features a TUV-certified 94% efficiency rate and ships with dual mains input and a built-in maintenance bypass switch. Additionally, the product includes an environment monitoring card, along with a start-up service to ensure proper configuration. The UPS relies on IP 51 reliability protection, a standard 2-mm thick steel plate enclosure, and user-replaceable air filters. www.apc.com #6

UPS

The Eaton 9395 UPS with Energy Saver System delivers 99% efficiency when utility power is within normal tolerances, and when the utility power falls outside acceptable limits for IT equipment, the UPS switches to double-conversion mode. The intelligent power core continuously monitors incoming power conditions and balances the need for efficiency with the need for premium protection. The UPS is rated for 550 kVA and provides N + 1 redundancy. www.eaton.com #7

Generator set

The Kohler Large Industrial Gas (180-400 kW), EPA-certified generators from Kohler Co. provide one-source responsibility for the generating system and accessories. The generator set and its components are prototype-tested, factory-built, and production-tested. The 60 Hz generator set offers a UL 2200 listing and accepts rated load in one step. The set meets NFPA 110, Level 1 requirements and conforms to the New Source Performance Standard for stationary spark-ignited emissions. www.kohlerpower.com #8

Generator set

The MTU Onsite Energy series 1600 generator set is a diesel-powered genset covering a range of 250 to 600 kW. The genset is based onthe MTU Series 1600 engine, which has a power range as low as 250 kW and up to 600 kW. The genset features EPA certification, compliance to ISO 8528-5 testing for transient response at 85% load, NFPA 110 one-step rated load acceptance, and digital control panels that are UL recognized. www.mtu-online.com #9

Wireless system

The GRAFIK Eye QS Wireless from Lutron Electronics Co. is a fully customizable preset light and shade control system. The system uses wireless connections to Sivoia QS wireless shades, wireless occupancy sensors, and additional GRAFIK EYE QS wireless units. The device features an energy savings indicator, built-in astronomical and programmable time clock, daylight harvesting of incandescent and fluorescent lights, and direct connection to occupancy sensors for manual on/automatic off function. www.lutron.com #12

Energy monitor

The Convia-enabled Wiremold System from Legrand/Wiremold and Convia helps companies meet energy goals by allowing for the integrated control and monitoring of plug load, lighting, and HVAC/ thermostats from a controls and management platform. The platform provides real-time energy usage reports displayed on its dashboard, and users can control and meter energy at a zone or circuit level from one place with the Energy Track Reporting Tool. #15

Pump controller

The Technologic 5500 variable speed pump controller from Bell & Gossett features the BACnet Testing Laboratories Mark for both BACnet MS/TP and BACnet IP. The device features a plug-and-plug automatic discovery functionality that allows the BAS to automatically detect the pump controller on the network and build a database of communication points. The pump features a summer/winter switch that processes two independent setpoints depending on the season, a pump exerciser for constant speed booster systems, and an emergency power feature. www.bellgossett.com #18

Cabinet

The RN Series cabinet from AAON is insulated with spray foam insulation and the supply fans are direct drive, which eliminates the problems associated with belt-driven systems including continuous maintenance and belt tightening, belt debris that clogs filters and soils supply air diffusers, and energy lost transferring energy from the motor to the fan. The compressor is variable capacity and offers precise load matching capability. Multiple unit efficiency options are available and meet ASHRAE 90.1, ASHRAE 189, CEE Tier 1, and CEE Tier 2 standards. www.aaon.com #21

Sub-meter

The Shark 200-S sub-meter from Electro Industries/GaugeTech provides accurate 0.2% revenue-certified bidirectional energy measurement coupled with extensive interval data logging and patented IEEE 802.11 Wi-Fi communication. The meter features 2 MB of logging capability while recording power aspects such as voltage, current, frequency, watts, VARs, and PF, in addition to interval energy data. The meter can store up to three historical logs, as well as alarm and anti-tampering system events logs. #25

Thermal imager

The Fluke Ti32 thermal imager features a 320 x 240 sensor to provide detailed thermal images to the user. The imager helps the user strengthen maintenance programs and increase reliability by detecting programs in electrical installations, electromechanical equipment, and process equipment. The imager uses Fluke IR-Fusion technology to combine high-precision thermal images with visual images, and the 3-D viewing makes hot or cold spots pop out of the background for easy viewing. www.fluke.com #26

Digital multimeter

The Fluke 233 digital multimeter features a detachable wireless display. By sliding the display out of the meter body, the user can place the display up to 33 ft from the point of measurement. The detachable feature allows the user to find a comfortable position to view test data, view readings when the test point is across the room, run tests and read results at a safe distance from electrical and mechanical hazards, and devote full attention to the separate tasks of positioning the meter and reading test results. www.fluke.com #27

3a8082e126