Simple steps to replace the front indicator.

[AntonD]

Hi

Today I will get a new indicator to replace to broken one.

I had a quick look last night, but I am unsure of the basic steps to
take to be able to replace the right front indicator.

Can someone possibly describe in 5 to 10 basic steps how to dismantle
the front of the bike to replace the complete indicator housing?

Thanks
Anton

[aus10]

Hi Anton

Am no expert at this, but recently took off my front headlight fairing
- this should get you pretty close to get access to the indicators.

To remove headlight fairing:

1 - remove two bolts on each side of fairing (just below indicators)
2 - remove two bolts underneath fairing (close together in centre just
below headlight)
3 - remove four screws holding speedo console onto fairing (from top
of speedo)
4 - speedo console can then pull upwards and come loose
5 - this gives you access to two more bolts behind speedo which holds
headlight assembly onto frame - close together in centre

The whole headlight assembly should then be able to be pulled forward
and give you access to indicators.

If you still battling, have a look at the workshop manuals (available
on this forum) which should show how it is all assembled.

Cheers
Andrew