avr-xboot

Did anything come from this thread? I am interested to work with encrypted firmware files. On

It isn't implemeted on atmega for historical reasons. Basically, xboot was written originally for

Update: It appears to work by doing copy/paste of the config file into the makefile.

Well. It now works (For now...) Try as I might I can't reproduce the error. After a couple of

Well, good catch! It must have something to do with your compiler. Not sure what the issue is, though

Well, I hardcoded the serial now but I'll try to adapt avrdude anyway. Thanks a lot so far!

Unfortunately, it does not. I believe the patches on the bug report still work, but I have not tried

Here's the size I get with both UART and I2C built in: Size after: xboot.elf : section size addr

Just rebuilt and tested it - works great! Thanks again, Alex! Steve On Tue, Jun 21, 2011 at 5:28 PM,

It's possible that the BAUD rate selections in XBoot.h are not quite ideal. When I calculated the

Tom- Well, it could be config or errata, but I think we're going to need a bit more than "

This might be a little far fetched to include in the standard XBoot line-up, but I thought I would

Well, XBoot uses a modified version of AVRDude to access the signature rows, so you won't be able

That's a good idea. Also, the idea behind XBoot is that it's the eXtensible Bootloader (not