Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
a2ki wont plot any of my blocks
0 views
Skip to first unread message
Jaime
May 10, 2001, 10:07:24 AM5/10/01
to
i insert blocks with attributes for my surface symbols and also my revision
symbols...but for some reason they will not plot. wont plot from paper
space nor model space...ive even tried to switch printers.
symbols...but for some reason they will not plot. wont plot from paper
space nor model space...ive even tried to switch printers.
any help would be great.. Thank You,
Jaime
Terry
May 10, 2001, 11:53:29 AM5/10/01
to
Did you explode these blocks ?
I found that when you explode the atribute then you will npot be able to
plot the text within the symbol, either that or you have them on a non print
layer.
If that is the case and its too much to change them back, then Bind all the
xref's ..explode them all, then plot like that ..but don't save the drawing.
I found that when you explode the atribute then you will npot be able to
plot the text within the symbol, either that or you have them on a non print
layer.
If that is the case and its too much to change them back, then Bind all the
xref's ..explode them all, then plot like that ..but don't save the drawing.
--
Terrance Smith
Kasian Kennedy Architecture, Interior Design
and Planning Incorporated
www.kasian.com
"Jaime" <jfi...@precisionform.com> wrote in message
news:01c0d95a$c67b7e80$2c6464c0@pfieng04...
0 new messages