Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Suitable 3d video card?

0 views
Skip to first unread message

Glynn Richardson

unread,
Mar 30, 1998, 3:00:00 AM3/30/98
to

I am considering the purchase of an 3d video card providing
it can meet the requirements listed below for a multi-operating system
networked computer. If you can recommend a card that will suit my
purpose that would be graet! Thanks.

Requirements:

1- I need to run Autocad 13(1280x1024 resolution) under DOS 6.2.

2- I need to run Windows 3.11 for Workgroups-variuo
spplications(1280x1024 resolution).

3- I need to run Autodesk's Vis 3-D and Autocad 13/14 under Windows
NT(1280x1024 resolution).

note:I have tried a Glyder Max2 3-d card and had problems with it under
DOS and Win3.1.

Your assistance would be greatly appreciated in this matter.

Thanks in advance.

Glynn Richardson
grich...@rca.on.ca

Mike McNamara

unread,
Mar 30, 1998, 3:00:00 AM3/30/98
to

Glynn Richardson wrote in message <352016...@rca.on.ca>...

>I am considering the purchase of an 3d video card providing
>it can meet the requirements listed below for a multi-operating system
>networked computer. If you can recommend a card that will suit my
>purpose that would be graet! Thanks.
>
>Requirements:
>
>1- I need to run Autocad 13(1280x1024 resolution) under DOS 6.2.


You want a new 3D Video card that will run DOS 6.2 at that resolution? Good
luck!

grich...@rca.on.ca

unread,
Apr 3, 1998, 3:00:00 AM4/3/98
to

Hey Mike thanks for the response. Perhaps I should have been more specific in
my post. When I listed my requirements(see below)I should have said that I'm
looking for a 2d/3d card that will run:

1- (2D)Autocad 13 under DOS6.2
2- (2D)Windows 3.11 for Workgroups -variuos applications
3- (3D)Autodesk's Vis 3-D and Autocad 13/14 under Windows NT(1280x1024
resolution).

It is under NT that I ned the 3D capability. Any suggestins you may have Mike
would be very much appreaciated.

Original Requirements list:

1- I need to run Autocad 13(1280x1024 resolution) under DOS 6.2.

2- I need to run Windows 3.11 for Workgroups-variuo
spplications(1280x1024 resolution).

3- I need to run Autodesk's Vis 3-D and Autocad 13/14 under Windows
NT(1280x1024 resolution).

note:I have tried a Glyder Max2 3-d card and had problems with it under
DOS and Win3.1.

Your assistance would be greatly appreciated in this matter.

Thanks in advance.

Glynn Richardson
grich...@rca.on.ca


In article <6fp644$a7...@adesknews2.autodesk.com>,


-----== Posted via Deja News, The Leader in Internet Discussion ==-----
http://www.dejanews.com/ Now offering spam-free web-based newsreading

0 new messages