Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Display problem with #9 3D Revolution
0 views
Skip to first unread message
José Santos
Jan 19, 1999, 3:00:00 AM1/19/99
to
I've got a PII 233 in a Intel Dual Pentium II Dakkota Motherboard (Whith
only one processor), 128 SDRAM RAM, #9 Revolution 3D card w/ 8MB WRAM, SCSI
hard drive, Win 98 and Autocad R14.0 (sic.) When I'm drawing in AutoCAD
14.0,
I get wierd video problems. For example, any selection with cross window
will make solid lines look dashed, fillet will cause other lines to
disappear, etc, etc,and above all the computer freezes and crash without any
error message. I have the latest video drivers installed because I thought
it was a driver problem, but that didn't work. #9 reply me with this:"If the
problem is consistent across resolutions. Please consult application
documentation". I've changed resolutions, drivers, colours, .... I've done
that and the problem is still the same.
only one processor), 128 SDRAM RAM, #9 Revolution 3D card w/ 8MB WRAM, SCSI
hard drive, Win 98 and Autocad R14.0 (sic.) When I'm drawing in AutoCAD
14.0,
I get wierd video problems. For example, any selection with cross window
will make solid lines look dashed, fillet will cause other lines to
disappear, etc, etc,and above all the computer freezes and crash without any
error message. I have the latest video drivers installed because I thought
it was a driver problem, but that didn't work. #9 reply me with this:"If the
problem is consistent across resolutions. Please consult application
documentation". I've changed resolutions, drivers, colours, .... I've done
that and the problem is still the same.
Please, I'd appreciate any help.
0 new messages