SummaSketch III Pro and NT 4.0

[N07828]

We currently have R14 on a Windows 95 machine with a Summagraphics
SummaSketch III Pro tablet. We're considering upgrading/replacing the
computer with a machine running NT Workstation 4.0 SP3, and are wandering
if there are any compatibility issues related to the digitizer and NT 4.0.
Anyone out there tried this table with NT???

Allen Witt
WI...@ORAU.GOV

[Timothy B. Storey]

Allen,

I ma running a Summasketch III w/ NT 4.0 SP3. The only thing I can suggest
is to use a wintab driver and avoid the ADI drivers. If you use multiple
sessions of R14 you might want to use the digifix program on the Autodesk
website, especially if there are little "acad.exe" processes running after
you exit Autocad.

Tim Storey

N07828 <WI...@ORAU.GOV> wrote in article
<01bd720b$adf25af0$8f427dc6@n07828>...

[Calcomp Tech Support]

The SummaSketch III Pro Tablet is compatible with NT Workstation 4.0 SP3.
You will want to download our latest driver TWnt95v51.exe from our website
of www.calcomp.com. Once you have installed this driver and have the
digitizer working like a mouse on the desktop enter into R14 and configure
the digitizer for the "Wintab Compatible driver by Autodesk." If you have
any problems you may want to check out our latest addition to our website
ANSWER STATION this provides answers to common questions and a knowledge
base of downloadable setup instructions. It can be found under What's New.

Amy
Calcomp Tech Support