Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
problem autocad+autosolids
0 views
Skip to first unread message
deekodiver
Oct 19, 2004, 5:23:19 PM10/19/04
to
I'm using autosolids.
When I use the funstion quickdraw, i can make perfect 2D-drawings of every
3Dsolid in the model.
Saving these drawings as dxf en opening within autocad works without
problem.
When I use the funstion quickdraw, i can make perfect 2D-drawings of every
3Dsolid in the model.
Saving these drawings as dxf en opening within autocad works without
problem.
However , using these dxf-drawings on my lasermachine indicaties me dat all
lines en circles are mixed up. Using a simple dxf-vieuwer tells me te same.
Reopening these files in Autocad shows me again perfect drawings. Checking
properties of every object is OK.
What could be the problem ??
mataeux
Oct 19, 2004, 8:16:14 PM10/19/04
to
IT SEEMS LIKE YOUR EXPERIENCING A PROBLEM WE HAVE DISCUSSED BEFORE
WITHOUT THE COMPLICATED EXPLANATION, HERE IS A QUICK SOLUTION:
OPEN THE DXF FILE IN AUTOCAD, THEN
SET THE USER COORDINATE SYSTEM TO THE 'FRONT' PLANE
(Command "._UCS" "_FRONT")
MIRROR ALL OFFENDING OBJECTS
(Command "._MIRROR" "_ALL" "0,0" "1,0")
SAVE THE DXF FILE NOW
GOOD LUCK
"deekodiver" <deekodiv...@hotmail.com.invalid> wrote in message
news:41758671_3@newsprd01...
0 new messages