Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Create 3D Polyline by Elevation error
0 views
Skip to first unread message
Brian Hailey
May 7, 2002, 4:14:13 PM5/7/02
to
I've noticed (twice now) that sometimes when I create a 3D polyline line
using the aforementioned routine around a curve, one of the vertices of the
polyline is at a zero elevation. Anyone ever seen this before? It's kind
of annoying.
using the aforementioned routine around a curve, one of the vertices of the
polyline is at a zero elevation. Anyone ever seen this before? It's kind
of annoying.
Brian
Joe Bouza
May 9, 2002, 8:31:53 AM5/9/02
to
Yes, assuming you are using the curve subprompt in transition. Try
transitioning around a curve with just near points - then you wont have to
answer to that last promt < number or mid point or dist> who cares ; we're
not making swiss watches are we, good luck
transitioning around a curve with just near points - then you wont have to
answer to that last promt < number or mid point or dist> who cares ; we're
not making swiss watches are we, good luck
"Brian Hailey" <jugg...@hotmail.com> wrote in message
news:E54714EFCB4F2587...@in.WebX.maYIadrTaRb...
0 new messages