How to change the time on Austar Decoders

[Thomas 'bacco007' Baxter]

At 2.00am on Sunday 28 October, daylight saving begins in NSW, VIC, SA
and ACT. Turn your clock 1 hour forward to 3.00am!

QLD, NT and WA do not have daylight saving. All program times listed
will be Daylight Saving Time (DST).SA viewers should subtract 30
minutes.NT viewers should subtract 1.5 hours.QLD viewers should
subtract 1 hour.
HOW TO CHANGE YOUR CLOCK.
Pace boxes
Step 1: Press the Menu key on your remote control.
Step 2: Press the 4 key on your remote to select the Decoder Settings
option.
Step 3: Use your up and down arrow keys to highlight Local Time. Press
Select to set the local time.
Step 4: Press the up or down arrow keys until the closest correct
Local Time is displayed. Press the Select key to save the change.
Step 5: Press the Exit key a number of times until you return to a
normal picture. The time on your set top box has now been correctly
set. Repeat this procedure whenever daylight saving begins or ends.

SMS & ADB boxes
Step 1: On your remote press the menu button.
Step 2: Use the left or right arrow keys to highlight the Settings
menu.
Step 3: Press the 4 key to select the Decoder Settings option.
Step 4: If necessary, use the up and down arrow keys to highlight
Local Time. Press OK to select the Local Time option. Use the left or
right arrow keys to select the correct time zone region on the right
of the screen eg. NSW.
Step 5: Press OK to save the changes. Press Exit several times to
return to a normal picture. Your time zone has now been entered and
your set top box will aautomatically update itself whenever daylight
saving begins or ends.
These instructions can be found in your User Manual Guide or the
October program guide.
Thomas 'bacco007' Baxter
--- 'Captain Nucklehead' ---
email: bacc...@softhome.net
msn: thomas_b...@hotmail.com
ICQ: 33807875
www: http://auspaytv.ipfox.com

"You will have to speak up, I'm wearing a Towel" - Homer Simpson