Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Kenwood TS2000 Extended (Out of Band) TX Mod
1,706 views
Skip to first unread message
Chris Wright
Nov 27, 2011, 10:24:23 PM11/27/11
to
Here is a Kenwood TS2000 modification that I have performed and use on
my TS2000 for 11M Transmit.
- Disconnect power cord and antenna from the transceiver.
- Remove the top and bottom covers.
- Remove the top screw from each side of the front panel assembly.
- Loosen the bottom screw from each side of the front panel assembly.
- Carefully rotate the front panel forward to gain access to the
control board(X53-3910-11).
This board is mounted vertically against the body of the transceiver.
It is not the board that is mounted in the front panel assembly.
- Locate and remove resistor R53 from the control board.
- Assemble the transceiver then perform the CPU reset procedure by
holding the A=B button in while turning on the power.
- Transmit Range: 1.705-30MHz, 49-54MHz, 142-152MHz, 420-450MHz,
1240-1300MHz.
Enjoy the great 11M DXing on 27.555 mhz.
Chris Wright VK2UW
my TS2000 for 11M Transmit.
- Disconnect power cord and antenna from the transceiver.
- Remove the top and bottom covers.
- Remove the top screw from each side of the front panel assembly.
- Loosen the bottom screw from each side of the front panel assembly.
- Carefully rotate the front panel forward to gain access to the
control board(X53-3910-11).
This board is mounted vertically against the body of the transceiver.
It is not the board that is mounted in the front panel assembly.
- Locate and remove resistor R53 from the control board.
- Assemble the transceiver then perform the CPU reset procedure by
holding the A=B button in while turning on the power.
- Transmit Range: 1.705-30MHz, 49-54MHz, 142-152MHz, 420-450MHz,
1240-1300MHz.
Enjoy the great 11M DXing on 27.555 mhz.
Chris Wright VK2UW
toowoomba4350
Nov 28, 2011, 6:59:57 AM11/28/11
to
Besides this being illegal IF we need mods we google them!
toowoomba4350
Nov 28, 2011, 4:10:50 PM11/28/11
to
On Nov 28, 1:24 pm, Chris Wright <chris.wright.vk...@gmail.com> wrote:
Besides this being illegal IF we need mods we google them chris!
0 new messages