Can Audiolense produce filters compatible with miniDSP 2x4 or 2x4 HD

[DRCuser]

Hi all

Can Audiolense produce filters compatible the miniDSP standalone's DRC boxes:

2x4 or 2x4 HD or 4x10 HD 10x10 HD ?

If so, can anyone share the process?

https://www.minidsp.com/products/minidsp-in-a-box

Thanks

[Bernt Rønningsbakk]

Yes,

 

You can choose a binary format under “setup”, and then you have to check the filter length used by the miniDSP unit and enter that as number of taps in the correction filter designer.

 

The miniDSP units allow for quite short filter lengths. It works  pretty well on full range correction, but I believe they are too short for a very good result at low frequencies when crossovers are added.

 

Mvh,

Bernt

--
--
Audiolense User Forum.
http://groups.google.com/group/audiolense?hl=en?hl=en
To post to this group, send email to audio...@googlegroups.com
To unsubscribe, send email to audiolense+...@googlegroups.com

---
You received this message because you are subscribed to the Google Groups "Audiolense User Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to audiolense+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/audiolense/88b451e0-2d21-4ce7-997f-676fdfe114c4n%40googlegroups.com.