atv-bootloader

I forgot to mention that openmediavault is a linux based on debian 7. Here is the site: http://www.

> sorry I just too busy the last semester,I'll do the replacement one week > later,and now

Hi, I have an ATV with a sil3132 mini pcie Sata card (MPX-3132) installed in place of the Wireless

> I'm happily running Ubuntu 12.04.1 LTS, although I could swear the distribution was called

On Jul 25, 2012, at 7:34 AM, Scott D. Davilla wrote: >> Long-term, I think changes to the VBIOS

I have been trying to debug the issue which is causing only ~64M of the total 256M being made

On Sunday, June 3, 2012 3:34:00 PM UTC-4, Bharath Ramesh wrote: On Sunday, June 3, 2012 8:58:32 AM

The same thing happened to me. The issue was that the HFS+ partition was not cleanly unmounted and

I tried adding video=normal nomodeset still no go. The apple tv is stuck with that line and doesnt

I have found the problem. I had a hard drive cable in the third appletv that wasn't seated

I searched the groups to see that at least one person (Scott Davilla) has been able to boot the Apple

Hi, Somehow I came off of this group and I'm not sure how. Didn't realize there has been so

Hi All, Firstly I big thank you to all the people who've helped in this awesome project. I was

>Like the subject says, can I restore my ATV to a factory state w/oa >backup? Has any kind soul

All, I have been trying for some time to use the recovery 1.0 version, but keep having an issue,

hi, > Also, according to [url=http://code.google.com/p/atv-bootloader/wiki/ >

I am having a similar issue as well. Not sure if it is the resolution that the 1.0 kernel tries to

Thanks for the heads up! Here's to hoping the fact that I'm using 3.0.6 won't come back

When I go to Settings -> System -> Debugging -> Enable Then in /Users/frontrow/Library/Logs/

I now have a mint install with GRUB Legacy. went back to the 0.6 ATV bootloader because all I got was

What do you want to restore it to? Factory image? On Oct 4, 11:13 pm, Andrew Brasher <and...@inkmd

Still have it? I can always use parts. On Aug 8, 7:49 am, Paul <pfru...@gmail.com> wrote: >

May be limited by AppleOS but I think so. if you swap cables it becomes irrelevant. let us know how

What (internet page) set of instructions did you follow to create the USB key? The ones I used (which

In future such notices please blind CC everyone so email addresses are not exposed. -Peter Sent from

I have two ATVs which I am attempting to setup at the same time. I am also using the same software,

For those that have manged to get 10.04 running, can you also provide the kexec line you used and any

>Following the same procedures as my previous post, I can successfully >launch the setup for a

I see this behaviour when I plug in a USB extender (powered). If I plug it in, then plug in my USB

BTW, when I run the parted utility it works as expected but I always have two lines after it: sh: