[X Force Keygen AutoCAD 2009 Crack
Sharif Garmon
I spent a couple hours modifying an existing AutoCAD LT for Mac dwg but had to Force Quit when a hatch command caused the program to freeze. When I went to find the backup or saved dwg file, the only one listed is from 6 days ago. Why doesn't AutoSave do what its name implies?? Two hours of tedious work down the drain.
The first thing we should check is where you are looking for the recovery DWG file. Fusion recovery files can be found in the locations at this link. If you are looking for a recovery DWG file in Windows File Explorer or Mac Finder, you will not find it - you will only see the original DWG file. After a DWG file is uploaded to the Data Panel in Fusion 360, it is translated to F3D (Fusion native) format. You will not find a recovery DWG file - this is because Fusion 360 does not keep the file in DWG format.
There are some safeguards in place. When an auto-save is canceled due to option 1 & 2 above, it will continue to attempt to auto-save on a 1 minute interval once the user finishes the current command. If too many failures happen in a row, a forced auto-save will happen as soon as the operation is finished. However, this does requires a state of quiescence to successfully complete the save.
I should have mentioned that I disabled iCloud due to it causing many issues with the Mac AutoCAD Lt software. So now I'm assuming that by doing this I also disabled the AutoSave function? I don't use Fusion360, as it requires access to the cloud. Am I correct in saying this?
Thanks for the response - I notice now that you mentioned this in the initial post, but I did not notice you are working with AutoCAD LT. I am not an AutoCAD expert and will transfer this post over to their forum board. Some of our experts over there should be able to help out.
I am sorry the AutoSAVE did not save your file in this instance. I do not recommend setting it more frequently than the default as this can actually cause more problems by too frequently accessing your hard drive. In my opinion, there is no substitute for a manual Save. An autosave is intended to provide an opportunity to recover data in case of a crash. It might not always work though depending on the status of the crash, when the last autosave was performed, if it has inadvertently been turned off, etc.
I have an unusual part that I'm having trouble dimensioning. Nothing in the part is aligned to the origin so when I go to pull dimensions it's trying to pull those oblique-style dimensions as if it were an iso view.
I made a video showing the issue, since it's kinda hard to describe. You can see when I use the dimension tool and click on two lines you would expect an angular dimension, but instead it gives me a strange oblique dimension as if I were pulling it from an isometric view.
So what's causing this? I'm assuming it's either because the part is not aligned to the origin or because I'm using a custom view orientation, or maybe a combination of the two. Is there any way to force an angular dimensions instead of those weird oblique dimensions? Is my workaround the only way to do this?
Yes, that is the cause of your issue. You can realign the part, relative to the origin, by editing the sketch coordinate system (Right-click on the sketch in the browser, select "edit coordinate system", then follow the prompts in the lower right corner of you application window). That will probably fix it.
When Fusion hangs and lags for what seems to be an indefinite period of time, and you find yourself staring at the unfeeling spinning wheel of death and knowing there is no way to take back control other than a force quit. Instead of potentially wrecking your hard work for the gamble it was saved, what about a "force quit process" using the "Command . (period) keys"? to stop the last command and regain control?
I am afraid the problem is deeper. I think F360 is missing a proper crash handler somehow, and once there is an unhandled exception or other stack overflow or whatever happened, there is no programmatic way to regain control.
I am saying this is OS controlled, the only way for Fusion not to do it is for it to get fixed. Somewhere there are missing try catches, or who knows what. So I'd report them as bugs. The only way I can think of to implement what the OP is suggestion would be a separate fusion process monitoring the main, but at best you probably won't get your files back.
My original thought was if, say in Sketch, I try to use a pattern or mirror tool command and then F360 just hangs and hangs as it tries to process, It would be cool if there was a key command to cancel that process so we could try a less intensive solution. Is that the same as needing another layer to monitor F360 as you described? I can see how that would be an overall OS issue.
We are currently working on this with the ESC key so that you can kill process that is taking too long or crashing. Right now, we're working on making it work for Compute All, fillets, and some other modeling related solves. We still need to investigate the work for sketch solves since Fusion has different solvers for different workspaces/environments. We'll keep you posted on our progress.
With infinite computing power still not in view, I would like to request this to an elevated priority. I lose way more time than I'd like to admit to unfortunate line movements with crazy math attached, to the point of considering different software.
I want to assert force at angle of 10 deg to 90 deg at increment of 10 deg. I am standing at centre of room and have walls on both sides. starting from left which is 0 deg to straight which is 90 deg I want to check the feasibility and calculate deformation. Walls are upright and parallel only I move at 10 deg.
How can I work out forces in FEA ? FEA has option either perpendicular (Normal to face) or vector in X, Y or Z only. Is there a way to work out vector force at angle ? I have velocity and distances just need angular forces. See pdf attached for clarity.
Coming from AutoCAD I could create a table in a drawing and input numbers into it. If the number was anything greater than 999 then AutoCAD would automatically add the necessary comma at the thousands or millions place. I have searched high and low in all of the help forums and cannot figure out how to force this behavior in table in BricsCad
I had a deeper look and found this but there must be though a over riding top level setting. It will be part of the table dictionary, I just looked at a table. It is feasible to update all the cells via a lisp.
If you create a polyline in AutoCAD and check quickproperties it is indeed a polyline.If you now keep the begin and end vertex and remove all in between and check quick properties, autocad still says it is a polyline. Afaik, you cannot (over)write the autocad parameter to do so. I would argue that to call a line a polyline would be like realizing that you can identify a square as a heavily stroked circle. (even if it brakes some circle rules)
Please create an attribute on the output features named autocad_original_entity_type, and set it to autocad_polyline. This will force the output to be a polyline, regardless of the number of vertices.
Using a text file (.TAB) with the list of commands and layers, you can force AutoCAD to e.g. place all texts to the layer "ANNOTATIONS", place all hatches to the layer "HATCHING" and dimensions to the "DIMS" layers with predefined layer colours. You can also set block names which should be inserted to predefined layers - e.g. all Chair* and Table* blocks to the Furniture layer.
The general process that it follows is it opens the assembly, and sets the level of detail of various sub-assemblies to match user configured options. It then saves the assembly and opens a drawing that references it. From there it generates a pdf output.The problem is that the views do not show the levels of detail that have been set on the model components. So I'm wondering if there is a way to force an update before outputting the pdf?
I have found a work around which works for small models (e.g. 57 components, total size 26MB) which is to suppress and then un-suppress every drawing view on every sheet, plus calling sheet.Update(). But unfortunately this does not work for the large models (e.g. 514 components, total size 287MB) that this system is designed to work with. This does however work when run locally, just doesn't work on Forge, where it appears as if it hasn't had time to show the drawing views again before creating the pdf, as they are all blank.
795a8134c1