Patch Wizard

[Willy Aucoin]

Ihave been allocated a spatial analyst licence for Arc Pro by our administrator and seem to be able to use the image classification tools in ArcToolbox. Before this I need to generate training areas for a maximum likelihood supervised classification but the image classification tools are greyed out including the wizard - this seems the only way to generate training areas within Pro, and I'd like to do it that way. Any ideas as to why I can't see the tools? I am trying to also check if there is an issue with the install as well, but for now I'm puzzled.

As I've explained above the image classification tools are greyed out and unselectable. I have read the documentation you have posted, but the greying out of the tools prevents both approaches being tried. I am assuming that this has something to do with the status of the spatial analyst extension/installation as I do have the extension assigned by our administrator from AGOL. I can see no documentation now on how to ensure that the extension is present and enabled in Pro. As you noted, it used to be a case of manually enabling it in ArcMap, but this is no longer the case in Pro.

Will be good to see how you get on. In the meantime I am performing an unsupervised classification using Toolbox and working back from there, rather than defining training areas first. The other alternative is trying dedicated remote sensing software, which I may be able to access.

I just check again Jorgen, Spatial Analyst licensed, a *.tiff as an image, but the wizard remains inaccessible but the Classification tools are... even though it was a multiband tiff but not displaying as rgb

Hi all,

I've recently started using Prime Lite 20.1.1 (after using v13.x in recent years).

However, when i place a megafunction device in my schematic design, i no longer see/get a prompt to use the megafunction wizard - this is usually where i set the amount of bits needed and remove pin functions that i won't need etc.

Has the Megafunction wizard completely gone? or do i have to re-enable it in a menu somewhere?

When you add an IP by double-clicking, depending on the IP, you will either get the new IP Parameter Editor or you may still see the Megawizard on some IP, though that will probably eventually go away.

Hi sstrell,

ok, thanks.

When i double-click on an IP item (e.g. lpm_counter) it opens a window prompting me to "Save IP variation". it doesn't mean anything to me.

How do i actually place an IP function from the IP list on the right into my schematic design?

Additionally, as i look through the IP listing, there doesn't seem to be too many components to use when i compare it to the component listing in the normal 'place component' window.

Am i completely missing something? or do i have to go back to Quartus 13 to use the 100's of devices that i'm used to?

There is a difference between what you see in the schematic editor and what you see in the IP Catalog. Parts in the schematic editor are mostly pretty basic, primitives and other simple logic that can be added to a schematic without any parameterization required.

For more complex IP and customization of IP before adding to HDL code or a schematic, you create and parameterize an IP variant (a unique instance of the IP; you give the variant a custom name when you create it) from the IP catalog. In the process of doing this, the IP Parameter Editor or Megawizard will create a .bsf file (a schematic symbol file) if you enable the option so you can add the parameterized IP to your schematic. The Megawizard has a checkbox to enable creation of this file while the IP Parameter Editor has an option to create this file when you generate the IP at the completion of parameterization.

You see the "Save IP Variation" prompt because this IP is not available in your project library so this will generate the required files for this IP to work. Once you save the IP variation you will be prompted to edit the parameters of this IP on the MegaWizard. You can find the IP symbol in the "Project" library.

I think I can answer this better than any of the answers I've seen on this topic since I'm not sure some people understand the question. First off if Intel still uses the megawizard underneath the IP Catalog (they do) they should have left it in the Tool menu (and urge them to add it back). So even though you created the IP in the IP catalog tool, and that tool is still actually used the megawizard to create the IP, until the file is actually part of an instantiated design entry *and* Quartus is able to successfully run Analysis and Elaboration which includes the level that IP is used within, you wont be able to re-customized it as quickly (i.e. double click) or quickly get to the megawizard from the Tool menu as in pre 13.1 (I think when they removed it). To recustomize the IP go to the File menu-> Open and navigate to where the .bsf file is located (you may need to change the file type filter to see it). Double click it then when the symbol view opens, right click and select "IP Parameter Editor" (why not this does not say this is the legacy megawizard method or something like that) and you should see the good old megawizard you saw when you actually created the core. Hope that helps.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

Writing Overpass queries requires knowledge of the Overpass query language, and even then can sometimes be quite tedious, repetitive work. Overpass turbo's Query Wizard helps you by converting simple, human readable search terms into functional Overpass queries. An example: To get drinking water fountains, all you have to do is fire up the Wizard and type in the appropriate tag amenity=drinking_water.

A search consists of individual filter expressions, for example key=value (for a simple tag search) or type:node (to restrict the result to only nodes). Those can be combined with logical operations like and or or. Take a look at the following examples:

The simplest way of searching is to use object categories. For example one can use the terms Hotel, "Drinking Water", Hospital, etc. This works for all objects for which a preset is defined in the iD editor.

If a string (for example the value of one of the tag-selectors above) contains whitespace or other special characters (such as colons, dashes, non-ascii characters, etc.) it must be enclosed in quotes:

By default, the Wizard creates queries that search only in the current map view (via a ). By specifying a location filter at the end of the search you can also search in different places or even globally:

The place-names mentioned above are passed though a Nominatim search first. That means you can use any place name that you can also use on OSM's search box, like town names, POIs, addresses, etc. (Take care as you will search all places with that name: there are ways round this by using further search terms.)

You can create links to overpass turbo that use the query wizard to create a query (which is loaded on startup and presented to the user). An example is -turbo.eu/?w=pub+in+dublin. Such URLs to overpass turbo are both quite short and at least somewhat human readable.

This feature is also utilized by the search engine DuckDuckGo: You can simply type your query in their search box accompanied by !otw (which stands for "Overpass Turbo Wizard") and when starting the search you are immediately taken to the overpass turbo page with the query you entered.

You would like to see all ham-radio repeater in a certain region in Germany. The callsigns of the ham-radio repeater in Germany start all with DB0* (two examples: DB0XS, DB0SR) and the callsigns are located in the name tag.

By default, [timeout:25] is part of the query. It means that query will be stopped after running for 25 seconds. In some situations one may wish to increase this value to allow queries to run for a longer time.

From November on, as his following on 4chan, Reddit, Twitter, and other platforms grew, Q turned his readers into spies and soldiers by issuing coded orders and predictions that required great effort to interpret and tended to remain ambiguous even after lengthy contemplation. The messages often consisted of stacked one-liners that looked like imagist poems. They radiated mystery and portent. Take this example from March 3:

One night this spring, in northwest Arkansas, Matthew and I stayed up past midnight interpreting several recent posts from Q that trembled on the verge of clarity, seeming to offer highly privileged insights into a crisis rumored to be forthcoming. I sat on the couch. He paced. We thought out loud, competing to crack the message and setting different values for different variables. We argued our cases as the night slid by; we raved away in an ecstasy of guesswork. Q was being good to us. Q was delivering everything we craved.

The novel is the same way. It dies and dies so it can live and live. The Q tale may be loathsome and deeply wicked, a magnet for bigots and ignoramuses whose ugly dreams it caters to and ratifies, but as a feat of New Age storytelling I find it curiously encouraging. The imagination lives. A talented bard can still grab and keep an audience. Now for a better story, with higher themes. Now for the bracing epic of recovery that the dark wizards have shown us how to write.

"Food" means a lot of different things! It includes every ingredient that is in food or is used to make food - drinks, candy, condiments, and many more products for human or animal consumption. Read the full definition in Minnesota Statute 34A.01, Subd. 4.Similarly, a "sale" of food includes everything from selling food at a grocery store, to manufacturing and packaging food for re-sale, to giving food away as a donation or sample. Read the full definition in Minnesota Statute 34A.01, Subd.12.In Minnesota, food establishments are licensed by the state or local agency that has jurisdiction in the area the firm is located. This may be the Minnesota Department of Agriculture (MDA), the Minnesota Department of Health (MDH), or a county or city public health department. This wizard will help guide you to what license you might need or will direct you to the authority responsible for licensing your type of food business.Keep in mind that licensing requirements are separate from inspection requirements. A business may be licensed by one agency but inspected by multiple agencies or multiple divisions within one agency. A business can also be exempt from licensing but still subject to inspections, depending on the products that are made and sold.

3a8082e126