Vw Dcm3.7 Pinout

[Amaia Novara]

TheUSB dongle needs to be linked to a PC. The authorization process is automatic and requires Internet connection at the first attempt to work with an ECU. The dongle can be used on several computers.

The full kit is designed for direct connection to VAG TCMs. The cables (together with PCMFlash module 58) allow full data transfer from one TCM to another. Both micro and eeprom are supported. Thus, cloning is possible as well as full reading of factory or modified files. The kit includes the main cable and cables for specific transmissions. You can use standard KESS DSG cables with the main cable. Includes DL382, DL501, DQ200, DQ250, DQ500 + mail cable.

Allows connecting to the ECU via the original connector. It is possible to connect directly to the vehicle. Together with PCMFlash software (Module 71) and Scanmatik 2 PRO, you can read and write full flash. GPT contacts are changed by pinouting the chips and placing the pins in the right places, according to the diagram for a specific ECU. No special tool is required for pinout, it is enough to remove the retainer from the connector.

Scanmatik 2 PRO is a professional multibrand scanner designed for diagnostics of electronic control systems of American, European, Japanese and Russian vehicles. It can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

CombiBox is designed to connect an ECU to PCMflash and a J2534 device on the bench and to switch power and GPT1, GPT2 signals, and to form BOOT, CNF1 signals. When used with Scanmatik 2 PRO CombiBox for PCMflash allows to form GPT1, GPT2 signals necessary to work with Module 53 and Module 71, and future modules.

3a8082e126