Wifi Ftp Server For Pc
Joseph Middlebrook
There was a simple wizard during install where I selected my SSID from a list and entered my passphrase and that worked great. Now that the install is done I am having trouble configuring wifi. My Access Point is setup to WPA2 Personal TKIP or AES. Any advice would be greatly appreciated. I have been messing around with WPA supplicant ant my /etc/network/interfaces file with no luck.
Using either DHCP or a static config (doesn't matter which)--AND assuming your wifi worked during install--make your /etc/network/interfaces look something like below (for wlan0 should match the name of your wifi card listed under ifconfig -a e.g. your detected wifi card could be nicknamed eth1 by the OS for all I know.):
Perhaps you could try using Network Manager or Wicd. While Network Manager does have a few GUI dependencies which you might dislike having on a headless server, connecting to wifi is quite simple. For a hotspot setup by my Android phone (called Android AP), I could connect using:
I cannot connect to my email servers while using by computer and my iphone SE while on my home wifi. I can do so using celluar on my iphone if I turn off its wifi connection off. My ISP asked me to reboot my router. It works fine for several hours and then it stops working. I can still connect to the internet just fine, but I cannot get email to work. Any ideas?
The router and the modem worked together fine since I bought the router in 2017. I did not have any email connection problems. I migrated to a new computer a month ago and the the router and modem worked fine together, as I did not have any email connection problems.
The problem first surfaced earlier this week. Rebooting the router allows Outlook and my mail app on the iPhone to connect to the email server. But the connection problem comes back after several hours.
Solved (fingers crossed): My domain host (on second call to them) says they had blacklisted the IP address generated by the router. They tech service rep added the IP address to their white list and the connection to the mail server happened instantly.
In this example, you will use your WiFi Shield and your Arduino board to create a simple Web server. Using the WiFi library, your device will be able to answer a HTTP request with your WiFI shield. After opening a browser and navigating to your WiFi shield's IP address, your board will respond with just enough HTML for a browser to display the input values from all six analog pins.
I'm on xfinity cable with arris surfboard router and three puck google wifi mesh. I've fixed the IP address of the plex server (windows 10), forwarded port 32400 tcp and udp, also set the DNS to ISP provider. The server will connect very briefly for remote access, but almost immediately goes "not available outside..." The server is hardwired to a switch after the main base google router.
An odd thing about the message (besides the fact that it isn't true, I'm not running any rogue server I know of) is that it "sticks" to the top of the Home app updates list: meaning, it's always there when I open the app (on multiple Android devices that can access our Google Home) with the updated time in the upper left, almost like it was "just" reported. I find this a little odd, though I suppose it could just be the behavior of such a message in the Home app (first time I've ever encountered something like this).
It sure sounds like that Midea device is acting as a DHCP server, given the timing. I have a bunch of TP-Link Kasa gear around here as well, and it's never had a problem. That, combined with the timing of the error showing up coinciding with the addition of the Midea device, makes me suspect it the most. I would investigate the settings for that device more closely to see if it has a feature that sounds like "DHCP". In any case, at this point, I'm not sure I'd trust a device that poorly implemented. If I had an old WiFi router, I'd consider connecting it via Ethernet to put that device on a dedicated network behind a firewall.
Another question with your suggestion: supposing I did set up a spare router to isolate the Midea units, wouldn't Google WiFi see that as the exact symptom for what I'm trying to fix? (It vaguely starts to sound like a Richard Matheson story: He tried to remove the unknown server from his network, and in doing so he created the very thing he was trying to destroy...)
Incidentally, since powering off the Midea units, I've reenabled them and have not gotten the unknown server message. It's possible this was only during setup that Google Home flagged the bad behavior? I have one more unit left to install so may end up finding out for sure. Thanks.
My fenix 6 pro was bought from US, but I am using it in China. The watch is much cheaper than in China. it was working fine from the beginning. But my Garmin account was migrated to China domain about one year ago. Since then, the watch cannot connect to server through WiFi connections, shows error: "unable to connect to the server. Try again later". The WiFi connections can be added successfully on watch, but it seems cannot find a way to server, shows above error when I try to Sync.
If you have a Windows PC connected to your Wifi, please share the output of ipconfig /all as well as route print. Then try to ping your Mattermost server and see if it returns an IPv4 or an IPv6 address in the command window and also try to ping ipv6.google.com and share the output.
Somehow my Windows 10 laptop stopped getting the correct DNS servers sent from Wifi networks. It somehow locked 192.168.1.1 and won't accept whatever DNS IP comes from DHCP. I have no idea how/why, and I tried everything to fix. Any thoughts?
where *interface-UUID* is a unique ID that is assigned to the different interfaces on the local machine. ProfileNameServer is a REG_SZ string that contains a space-separated list of IP addresses of the nameservers to use. This appears to override the DhcpNameServer string, which is of the same format.
We just changed servers - meaning the old DHCP-server is shut down, and there is a new DHCP-server. Simultaneously, we changed DNS-server.I saw the same thing here - Windows 10 hangs on to the old DNS and no matter how many dhcp release/renew or reboots or whatever - keeps the previously used IP.
I am still a little puzzled as to what the error is caused by. Since we kept the DHCP range the same, I figured it was just the matter of the PC asking to keep the IP it had already been assigned (and thus keeping all the other parameters when the DHCP-server says "yes, fine").
My situation was slightly different but using this article helped me resolve my issue: -us/windows/forum/all/your-computer-is-trying-to-use-a-dns-server-that/c8f9e28e-7bb9-439c-bfac-3a097ddc2dfd?auth=1
I was able to determine that although my ipv4 adapter settings for DNS servers was correct, DNS lookup (nslookup someserver) was failing because it was first using the ipv6 DNS server adapter lookup and failing. Changing the ipv6 adapter settings for DNS server solved the issue for me.
Normally, some DNS servers are publicly available for private or commercial use. For example, Google has a open DNS server available on 8.8.8.8.Use this IP-address as your default DNS server instead of it being obtained automatically.
I just released a new beta version that gathers diagnostic information on device when these HTTP requests fail. After 15 minutes I received a report with the following error description:A server with the specified hostname could not be found.
IP addresses of the domains apple.com and google.com can be resolved, no matter what DNS server is used. But for my domain, it doesn't seem to be the case. Sometimes it is resolved correctly and sometimes not. Is there a way I can have a DNS entry added to these DNS servers? Why isn't it already there?
This is probably not a transport level issue (that is, not a problem with any TCP connection) rather an issue with DNS. Your client should be sending out DNS query requests (to UDP port 53 on the DNS server) and getting back replies (from that same port and IP address). You should be able to match these requests and replies to see if you get different results between your known good and know bad setup.
Ok, so I know how to query a DNS server for a given hostname, but where do I go from there? I could ask one of the beta testers to run similar queries when they encounter the problem, but how will it help? The only piece of information I will get is that they get no answer from their local DNS server. But the local DNS servers must be provisioned with DNS entries somehow. I'd say the problem is that for some ISPs, they don't provision their DNS servers with a hostname to IP address mapping for my domain. What can I do about that?
I used AWS to register the domain about 2 years ago and about 3 months ago I created an A record to route traffic from that domain to an IP address of a load balancer in Google Cloud. TTL is 300 seconds. It is a pretty standard setup so I'd expect it to work without any extra effort. The weird thing is that it works on cellular and on Vodafone WiFi networks so the DNS entry must have been added to some ISP's DNS servers, but apparently not to all of them.
Found a clear root of an ongoing issue that has riddled this forum. my iphone 9 ios 14 will send notifications, sometimes up to 20 at a time, severely hampering the use of the phone (you have to press "ok" each time). This is specific to when I am connected to the wifi at my work location, which obviously has security disabling access to my email server (in this case, outlook). It is my assumption that the ios lines up a cascade of alerts for each time it pushes email checks, to which I am compelled to clear upon unlocking the phone. The phone is completely unusable until all of these alerts have been "ok"'d.
760c119bf3