Buenas tardes,
tengo una sangoma A104 instalada en un ml350P G8 y estaba funcionando perfecto y la retire para instalarla en otro equipo y ahora que la quiero volber a instalar en mi servidor ml350 me genera este mensaje:
Stopping safe_asterisk: [ OK ]
Shutting down asterisk: [ OK ]
Shutting down device: wanpipe4
Shutting down device: wanpipe3
Shutting down device: wanpipe2
Shutting down device: wanpipe1
No devices running, Unloading Modules
Unloading DAHDI hardware modules: done
Starting WAN Router...
Loading WAN drivers: wanpipe done.
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !!
: ioctl(wanpipe1,ROUTER_SETUP) failed:
: 22 - Invalid argument
Wanpipe driver did not load properly
Please check /var/log/wanrouter and
/var/log/messages for errors
Starting up device: wanpipe2
wanconfig: WAN device wanpipe2 driver load failed !!
: ioctl(wanpipe2,ROUTER_SETUP) failed:
: 22 - Invalid argument
Wanpipe driver did not load properly
Please check /var/log/wanrouter and
/var/log/messages for errors
Starting up device: wanpipe3
wanconfig: WAN device wanpipe3 driver load failed !!
: ioctl(wanpipe3,ROUTER_SETUP) failed:
: 22 - Invalid argument
Wanpipe driver did not load properly
Please check /var/log/wanrouter and
/var/log/messages for errors
Starting up device: wanpipe4
wanconfig: WAN device wanpipe4 driver load failed !!
: ioctl(wanpipe4,ROUTER_SETUP) failed:
: 22 - Invalid argument
Wanpipe driver did not load properly
Please check /var/log/wanrouter and
/var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No existe el dispositivo
done.
Configuring interfaces: w2g1 w2g1: unknown interface: No existe el dispositivo
done.
Configuring interfaces: w3g1 w3g1: unknown interface: No existe el dispositivo
done.
Configuring interfaces: w4g1 w4g1: unknown interface: No existe el dispositivo
done.
Waiting for Dahdi /dev/dahdi ...
DAHDI Tools Version - 2.6.1
DAHDI Version: 2.6.1
Echo Canceller(s): HWEC
Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
124 channels to configure.
DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
pense que era por el hecho que haberla colocado en una nueva ranura pero la coloque en la ranura anterior y el mensage es el mismo.