Error al iniciar asterisk
Josep Aguilar
Hola, he reiniciado el PC en el que tengo asterisk y no puedo volver a arrancar asterisk. El mensaje que me devuelve el sistema es el siguiente:
“Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl exist?)”
Lo he comprobado y existe
¿Hay alguna manera de solucionarlo sin reinstalar asterisk?
Gracias
___________________________________________________________________________
Este mensaje se dirige exclusivamente a su destinatario y puede contener
información privilegiada o confidencial. Si no es vd. el destinatario
indicado, queda notificado de que la utilización, divulgación y/o copia sin
autorización está prohibida en virtud de la legislación vigente. Si ha
recibido este mensaje por error, le rogamos que nos lo comunique
inmediatamente por esta misma vía y proceda a su destrucción.
This message is intended exclusively for its addressee and may contain
information that is CONFIDENTIAL and protected by professional privilege.
If you are not the intended recipient you are hereby notified that any
dissemination, copy or disclosure of this communication is strictly
prohibited by law. If this message has been received in error, please
immediately notify us via e-mail and delete it.
___________________________________________________________________________
Tron
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En nombre de Josep Aguilar
Enviado el: viernes, 19 de mayo de 2006 8:40
Para: aster...@googlegroups.com
Asunto: [Asterisk-ES] Error al iniciar asterisk
Josep Aguilar
Gracias por la respuesta, el log es superlargo y no acierto a ver que es lo que esta pasando.
He leido por ahí que a@h mete mucha basura en los ficheros de configuracion, y quiza sea este el problema.
Voy a intentar empezar una instalacion de asterisk (no la version @home) desde cero y ver que tal se me da.
Por suerte era una instalacion de prueba y hacer esto creo que no va a suponerme ningun problema mas que intentar aprender a configurar asterisk a pelo.
Muchas gracias de nuevo
Josep
Josep Aguilar
Otra cosita, si al parecer es un modulo de asterisk que o no carga o la carga mal, ¿Hay algun fichero de configuracion donde dice lo que carga asterisk?
Gracias
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En nombre de Josep Aguilar
Enviado el: viernes, 19 de mayo de 2006
9:43
Para: aster...@googlegroups.com
Asunto: [Asterisk-ES] Re: Error al
iniciar asterisk
Gracias por la respuesta, el log es superlargo y no acierto a ver que es lo que esta pasando.
He leido por ahí que a@h mete mucha basura en los ficheros de configuracion, y quiza sea este el problema.
Voy a intentar empezar una instalacion de asterisk (no la version @home) desde cero y ver que tal se me da.
Por suerte era una instalacion de prueba y hacer esto creo que no va a suponerme ningun problema mas que intentar aprender a configurar asterisk a pelo.
Muchas gracias de nuevo
Josep
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En nombre de Tron
Enviado el: viernes, 19 de mayo de 2006
9:19
Para: aster...@googlegroups.com
Asunto: [Asterisk-ES] Re: Error al
iniciar asterisk
Tiene pinta de que ta ha fallado algo al arrancar, ya que tendrás algo que falla y el safe_asterisk te va levantando,
ejecuta un ps -aux y cárgate todas las instancias de asterisk y safe_asterisk. Una vez que estén muertos los procesos. arranca con asterisk -gcvvvvvvd y observa donde se te está cayendo asterisk y vemos como se puede solucionar.
Saludos,
tron
---~--~---
Tron
Josep Aguilar
Hola he redirigido la salida del comando “asterisk –gcvvvvvvvvvvvvdddddddddddddd” a un fichero de texto que adjunto.
No he visto ningun error, lo unico que me choca es que la configuracion del lenguaje es “us” y no veo que se pueda configurar “es” por ningun lado
¿Podria ser eso?
Saludos
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En nombre de Tron
Enviado el: viernes, 19 de mayo de 2006
10:45
Para: aster...@googlegroups.com
Asunto: [Asterisk-ES] Re: Error al
iniciar asterisk
Si quieres, en el logger.conf activas el debug => debug, arranca asterisk con asterisk -gcvvvvvvvvvvvvdddddddddddddd y envíanos lo que te sale en consola cuando peta y adjunta el fichero /var/log/asterisk/debug a ver si vemos algo, o si nos dices el módulo que no carga igual te podemos decir algo también.
Saludos,
tron
Tron
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En nombre de Josep Aguilar
Enviado el: viernes, 19 de mayo de 2006 11:06
Elio Rojano
Porque no he visto ningún mensaje de error...
¿Cuales son las últimas líneas cuando ejecutas este comando?
Josep Aguilar
Sale a Linux
Las ultimas lineas son:
-- Including context 'app-callwaiting' in context 'from-internal'
-- Including context 'app-messagecenter' in context 'from-internal'
-- Including context 'app-calltrace' in context 'from-internal'
-- Including context 'parkedcalls' in context 'from-internal'
-- Including context 'from-internal-custom' in context 'from-internal'
-- Including context 'ext-fax' in context 'from-internal'
-- Including context 'ext-zapbarge' in context 'from-internal'
-- Including context 'ext-record' in context 'from-internal'
-- Including context 'ext-test' in context 'from-internal'
-- Including context 'from-internal-additional' in context 'from-internal'
-- Added extension 's' priority 1 to from-internal
-- Added extension 'h' priority 1 to from-internal
-- Registered extension context 'ext-zapbarge'
-- Added extension '888' priority 1 to ext-zapbarge
-- Added extension '888' priority 2 to ext-zapbarge
-- Added extension '888' priority 3 to ext-zapbarge
-- Added extension '888' priority 4 to ext-zapbarge
-- Added extension '888' priority 5 to ext-zapbarge
-- Added extension '888' priority 6 to ext-zapbarge
-- Registered extension context 'ext-fax'
-- Added extension 's' priority 1 to ext-fax
-- Added extension 's' priority 2 to ext-fax
-- Added extension 'in_fax' priority 1 to ext-fax
-- Added extension 'in_fax' priority 2 to ext-fax
-- Added extension 'in_fax' priority 3 to ext-fax
-- Added extension 'in_fax' priority 4 to ext-fax
-- Added extension 'in_fax' priority 5 to ext-fax
-- Added extension 'in_fax' priority 6 to ext-fax
-- Added extension 'analog_fax' priority 1 to ext-fax
-- Added extension 'analog_fax' priority 2 to ext-fax
-- Added extension 'analog_fax' priority 3 to ext-fax
-- Added extension 'analog_fax' priority 4 to ext-fax
-- Added extension 'out_fax' priority 1 to ext-fax
-- Added extension 'out_fax' priority 2 to ext-fax
-- Added extension 'h' priority 1 to ext-fax
-- Registered extension context 'ext-record'
-- Added extension '*77' priority 1 to ext-record
-- Added extension '*77' priority 2 to ext-record
-- Added extension '*77' priority 3 to ext-record
-- Added extension '*77' priority 4 to ext-record
-- Added extension '*77' priority 5 to ext-record
-- Added extension '*99' priority 1 to ext-record
-- Added extension '*99' priority 2 to ext-record
-- Added extension '*99' priority 3 to ext-record
-- Added extension '*99' priority 4 to ext-record
-- Registered extension context 'default'
-- Including context 'ext-local' in context 'default'
-- Added extension 's' priority 1 to default
-- Added extension 's' priority 2 to default
-- Registered extension context 'ext-test'
-- Added extension '7777' priority 1 to ext-test
-- Added extension '666' priority 1 to ext-test
-- Added extension 'h' priority 1 to ext-test
-- Added extension '*43' priority 1 to ext-test
-- Added extension '*43' priority 2 to ext-test
-- Added extension '*43' priority 3 to ext-test
-- Added extension '*43' priority 4 to ext-test
-- Added extension '*43' priority 5 to ext-test
-- Added extension '*43' priority 6 to ext-test
[chan_mgcp.so] => (Media Gateway Control Protocol (MGCP))
== Parsing '/etc/asterisk/mgcp.conf': Found
== MGCP Listening on 0.0.0.0:2727
== Using TOS bits 0
== Registered channel type 'MGCP' (Media Gateway Control Protocol (MGCP))
[chan_sip.so] => (Session Initiation Protocol (SIP))
== Parsing '/etc/asterisk/sip.conf': Found
== Parsing '/etc/asterisk/sip_nat.conf': Found
== Parsing '/etc/asterisk/sip_additional.conf': Found
-- SIP Seeding peer from astdb: '200' at 2...@191.1.45.17:5060 for 180
-- SIP Seeding peer from astdb: '400' at 4...@191.1.45.4:5060 for 60
== SIP Listening on 0.0.0.0:5060
== Using TOS bits 0
== Parsing '/etc/asterisk/sip_notify.conf': Found
== Registered channel type 'SIP' (Session Initiation Protocol (SIP))
== Registered application 'SIPDtmfMode'
== Registered application 'SIPAddHeader'
== Registered application 'SIPGetHeader'
== Registered custom function SIP_HEADER
== Registered custom function SIPPEER
== Registered custom function SIPCHANINFO
== Registered custom function CHECKSIPDOMAIN
== Manager registered action SIPpeers
== Manager registered action SIPshowpeer
[chan_iax2.so] => (Inter Asterisk eXchange (Ver 2))
== Registered custom function IAXPEER
== Registered application 'IAX2Provision'
== Manager registered action IAXpeers
== Manager registered action IAXnetstats
== Parsing '/etc/asterisk/iax.conf': Found
== Parsing '/etc/asterisk/iax_additional.conf': Found
== Using TOS bits 0
== Binding IAX2 to '0.0.0.0:4569'
== Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2))
== IAX Ready and Listening
== Loaded firmware 'iaxy.bin'
== Parsing '/etc/asterisk/iaxprov.conf': Found
-- Loaded provisioning template 'default'
[chan_phone.so] => (Linux Telephony API Support)
== Parsing '/etc/asterisk/phone.conf': Found
== Registered channel type 'Phone' (Standard Linux Telephony API Driver)
[chan_features.so] => (Feature Proxy Channel)
== Registered channel type 'Feature' (Feature Proxy Channel Driver)
[chan_zap.so] => (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
== Parsing '/etc/asterisk/zapata-auto.conf': Found
== Parsing '/etc/asterisk/zapata_additional.conf': Found
-- Automatically generated pseudo channel
== Registered channel type 'Zap' (Zapata Telephony Driver w/PRI)
== Manager registered action ZapTransfer
== Manager registered action ZapHangup
== Manager registered action ZapDialOffhook
== Manager registered action ZapDNDon
== Manager registered action ZapDNDoff
== Manager registered action ZapShowChannels
[chan_local.so] => (Local Proxy Channel)
== Registered channel type 'Local' (Local Proxy Channel Driver)
[chan_oss.so] => (OSS Console Channel Driver)
== Parsing '/etc/asterisk/oss.conf': Found
== Registered channel type 'Console' (OSS Console Channel Driver)
[chan_skinny.so] => (Skinny Client Control Protocol (Skinny))
== Parsing '/etc/asterisk/skinny.conf': Found
== Skinny listening on 0.0.0.0:2000
== Registered channel type 'Skinny' (Skinny Client Control Protocol (Skinny))
[chan_agent.so] => (Agent Proxy Channel)
== Registered channel type 'Agent' (Call Agent Proxy Channel)
== Registered application 'AgentLogin'
== Registered application 'AgentCallbackLogin'
== Registered application 'AgentMonitorOutgoing'
== Manager registered action Agents
== Manager registered action AgentLogoff
== Manager registered action AgentCallbackLogin
== Parsing '/etc/asterisk/agents.conf': Found
[app_eval.so] => (Reevaluates strings)
== Registered application 'Eval'
[app_page.so] => (Page Multiple Phones)
== Registered application 'Page'
[app_mp3.so] => (Silly MP3 Application)
== Registered application 'MP3Player'
[format_g729.so] => (Raw G729 data)
== Registered file format g729, extension(s) g729
[app_readfile.so] => (Stores output of file into a variable)
== Registered application 'ReadFile'
[app_lookupcidname.so] => (Look up CallerID Name from local database)
== Registered application 'LookupCIDName'
[app_nbscat.so] => (Silly NBS Stream Application)
== Registered application 'NBScat'
[format_jpeg.so] => (JPEG (Joint Picture Experts Group) Image Format)
== Registered format 'jpg' (JPEG (Joint Picture Experts Group))
[app_txtcidname.so] => (TXTCIDName)
== Registered application 'TXTCIDName'
[format_mp3.so] => (MP3 format [Any rate but 8000hz mono optimal])
== Registered file format mp3, extension(s) mp3
[app_exec.so] => (Executes applications)
== Registered application 'Exec'
[app_sms.so] => (SMS/PSTN handler)
== Registered application 'SMS'
[func_uri.so] => (URI encode/decode functions)
== Registered custom function URIDECODE
== Registered custom function URIENCODE
[app_playback.so] => (Sound File Playback Application)
== Registered application 'Playback'
[cdr_addon_mysql.so] => (MySQL CDR Backend)
== Parsing '/etc/asterisk/cdr_mysql.conf': Found
[app_math.so] => (Basic Math Functions)
== Registered application 'Math'
[app_macro.so] => (Extension Macros)
== Registered application 'MacroExit'
== Registered application 'MacroIf'
== Registered application 'Macro'
[format_ilbc.so] => (Raw iLBC data)
== Registered file format iLBC, extension(s) ilbc
[app_stack.so] => (Stack Routines)
== Registered application 'StackPop'
== Registered application 'Return'
== Registered application 'GosubIf'
== Registered application 'Gosub'
[app_record.so] => (Trivial Record Application)
== Registered application 'Record'
[app_realtime.so] => (Realtime Data Lookup/Rewrite)
== Registered application 'RealTimeUpdate'
== Registered application 'RealTime'
[app_parkandannounce.so] => (Call Parking and Announce Application)
== Registered application 'ParkAndAnnounce'
[app_senddtmf.so] => (Send DTMF digits Application)
== Registered application 'SendDTMF'
[app_waitforring.so] => (Waits until first ring after time)
== Registered application 'WaitForRing'
[app_groupcount.so] => (Group Management Routines)
== Registered application 'GetGroupCount'
== Registered application 'SetGroup'
== Registered application 'CheckGroup'
== Registered application 'GetGroupMatchCount'
[app_setcidname.so] => (Set CallerID Name)
== Registered application 'SetCIDName'
[app_milliwatt.so] => (Digital Milliwatt (mu-law) Test Application)
== Registered application 'Milliwatt'
[codec_gsm.so] => (GSM/PCM16 (signed linear) Codec Translator)
== Parsing '/etc/asterisk/codecs.conf': Found
-- codec_gsm: using generic PLC
== Registered translator 'gsmtolin' from format gsm to slin, cost 1
== Registered translator 'lintogsm' from format slin to gsm, cost 1
[app_echo.so] => (Simple Echo Application)
== Registered application 'Echo'
[app_while.so] => (While Loops and Conditional Execution)
== Registered application 'While'
== Registered application 'ExecIf'
== Registered application 'EndWhile'
[cdr_custom.so] => (Customizable Comma Separated Values CDR Backend)
[app_setcdruserfield.so] => (CDR user field apps)
== Registered application 'SetCDRUserField'
== Registered application 'AppendCDRUserField'
== Manager registered action SetCDRUserField
[app_setcallerid.so] => (Set CallerID Application)
== Registered application 'SetCallerPres'
== Registered application 'SetCallerID'
[func_enum.so] => (ENUM Related Functions)
== Registered custom function ENUMLOOKUP
== Registered custom function TXTCIDNAME
[app_curl.so] => (Load external URL)
== Registered custom function CURL
== Registered application 'Curl'
[app_dumpchan.so] => (Dump Info About The Calling Channel)
== Registered application 'DumpChan'
Saludos
Josep Aguilar
Es cierto, creo que se ha caido al instalar webmin en el puerto 9000
Voy a probar una instalacion limpia sin instalar webmin, y si me aguanta un tiempo, probare a instalar webmin en cualquier otro puerto que se me ocurra.
Os cuento…
Elio Rojano
A ver ejecuta esto:
asterisk -gvvvvvc |tail -n 10
Josep Aguilar
Estas son las ultimas 10 lineas
== Registered application 'SetCallerID'
[func_enum.so] => (ENUM Related Func
tions)
== Registered custom function ENUMLOOKUP
== Registered custom function TXTCIDNAME
[app_curl.so] => (Load external URL
)
== Registered custom function CURL
== Registered application 'Curl'
[app_dumpchan.so] => (Dump Info Abou
t The Calling Channel)
== Registered application 'DumpChan'
[app_addon_sql_mysql.so]
Saludos
Josep
Vladimir de la Cruz
tail -f /var/log/asterisk/full
Con eso tendras las ultimas lineas de configuracion que checo el
asterisk y en que parte se queda.
Vlad.