Flashing Your Nokia Phone Using Phoenix Service Software

[Aryk Enterprise]

Flashing of phone can help revive or correct a particular phone errors and do some other things on the phone. In case a phone is dead, for as long as it powers, flashing of the phone can help bring back the phone to life.

Before you can begin flashing any Nokia phone using the phoenix service software, you need the following stuff:

1- A computer running windows XP (SP2, SP3) or windows 7.
Phoenix service software works best on computers running windows XP (SP3) and preferably on windows XP (SP2) or windows 7. Phoenix service software does not work well on windows vista at all -Aryk Enterprise has tested phoenix on computers running these OSs (Windows XP, VISTA AND 7) and that's the outcome.

2- You need to install the Nokia PC Suite on your computer -this works well in most computer OS.

3- Flash files.
These flash files are the most essential things you need to complete the flashing operation. The flash file of each Nokia phone contains the firmware update, content, signature and other firmware details of that particular Nokia phone.

Mind you! You must not use a wrong flash file. For any Nokia phone you wish to flash, you must use its exact flash file otherwise, an unspeakable damage may be caused to that phone.

Starting the Flashing Operation Using Phoenix Service Software

To start the flashing operation using the Phoenix Service Software installed on your computer;

1- Lunch the Phoenix Service Software icon on your computer. By now, the Nokia phone should be switched off.

2- Connect the Nokia phone you wish to flash to your computer using the cable appropriate for your device then, make sure that the computer detects the device before you proceed.

3- Click on the "File" option to open the drop-down menu then; select "Open Product".

 This should open another box from within which you can select the RM of the product you wish to flash.

E.g. select "RM-504" if it is a Nokia 5530 you wish to flash.

4- Select the "Flashing" option. A drop-down menu appears and from there, select "Firmware Update".

5- By selecting the firmware update option, another pup-out appears, select the product code.

Once selected, the appropriate product code would be loaded automatically.

6- Tick the "Dead Phone USB Flashing" box so as to make the phone flashing options clickable.

7- click the "Software`Reset Option" and the flashing process begins.
After about 10 - 15secs, phoenix would prompt you to disconnect the USB cable from the phone, remove the phone battery. Once done, reconnect the USB cable again, insert the battery then, press the power on button once.
In few seconds, the flashing process should continue until it finishes.

When the flashing operation completes successfully, phoenix service software would display the message in form of a pop-out box.

For a more detailed info and others tools, visit the source of this article below:
How to Flash your Nokia Phone
http://saibven.blogspot.com/2013/02/flash-nokia-phone-using-phoenix-service-software.html