Brother Printer Mfc-j415w Driver Free Download

[Daiana Parthemore]

For some other models, it has in fact been possible to use a fresh macOS Catalina 10.15 driver even for macOS 11 Big Sur, after a printing system reset (steps in link below). You may have tested this already. If so, please disregard this message. If not, a (version 1.5.0) macOS Catalina 10.15 printer driver download can be found here:

Hi Jan, yes that is what I did, downloaded the 10.15 Catalina driver and it now seems to work fine on Big Sur on our M1 MacBook Air. Thanks for your mention of this too as I only saw your comment afterwards. Many thanks!

Hi Moto, I have the same issue as you. I have a M1 MacBook Pro and a 2270DW Brother printer (pre-airprint). The MBP won't print when connected with usb. I did connect the printer to the network using WPS, and I have the iprint app on both the computer and my iPhone. The app on my phone recognizes the printer and will print. But the iprint app on the MBP doesn't recognize the printer. Did you find a solution?

Hello, for my Brother MFC-8480DN on my Mac mini m1 with Big Sur, I was able to successfully use the Brother printer driver 4.5.1 (for Mac os 10.15) and the scanner driver 2.90. My MFC both prints and scans now. After installing the drivers, remember to right-click in the system preferences > printers & scanners > printers window and "reset printing system", then re-add the printers. You might have to restart.

I had the same problem with my Brother DCP-7065DN not being able to print after upgrading to Big Sur 11.1 . Today I upgraded to Big Sur 11.2 and the Brother printer is now printing using the last upgrade that Brother down load had available for Mac OS, that being 10.15 on their web site. Sadly it looks like Brother is not going to be upgrading its driver for DCP-7065DN in the future.

This worked for me. A 7 year old Brother MFC-J415W would not connect to my new Mac mini M1 with OS 11, Big Sur. No drivers available on the brother website. Out of desperation I tried the Catalina driver on Big Sur and so far it has been working via USB and Wifi. Brother did not have a North American driver for Catalina so I downloaded the EU version.

Thank you a lot for posting this! I just got a new Mac Mini with Big Sur and M1 and only then found out that my printer is not supported any more. Or at least Brother didn't put it in their compatible printers list.

I then installed the Catalina (macOS 10.15) driver for my printer and everything works perfectly as before - printing with all features and also scanning. I'm very happy right now - already feared I'd have to buy a new printer, too.

Replies above indicate that macOS 10.15 printer drivers can be used with some other Brother models as well and Big Sur. Make sure that you have backup copies of important files before carrying out any tests. Look upon this as an experiment. There is always a certain risk involved with an experiment. Data may be lost. You ma have to erase and re-install everything on the hard disk. A hardware problem is unlikely, but it is impossible to guarantee anything.

Thanks for your prompt response I have now managed to install the printer driver, and the printer works (DCP-7055w), so glad, thank you for that - one final question if you know, I also tried to install the driver for scanning, by downloading and double clicking however I can't seem to find the icon anywhere to select, I have checked where the printer is located in the system preference - Printer & Scanning, its only showing the printer driver. am I missing something.

I was able to download iPrint&Scan. Also needed to download iPrint&Scan Push scan tool. I have an iMac and a DCP7065 DN printer. Check the brother customer support website for what will work with your printer. Remember to go back to your system preferences > network ...to add your printer device. Took a whole day to figure it all out, but am able to scan to email, print, and copy again.

Did u download iprint&scan push scan tool? Check to see if that is also required. When you try to set-up after downloading, you will get that message if u need it. The download appeared in the upper right corner of my machine as a notification, and i just clicked on that to install....which took about 4 seconds. It took me a while to find where the download went to.

This Brother MFC-J415w printer model is a superior product with very friendly outlook and body function for top performance. One of the impressive features of this printer is the presence of several keys and buttons for ease of operations. The printer also has an input tray on the frontal part that makes paper loading easy for users. Also, this device is very capable of printing, scanning, copying, sending and receiving fax messages.

The printing method relates to thermal inkjet print technology with a piezo type that has 94 nozzles. The memory capacity is about 32 MB of RAM that combines well with the processor to enhance the printer quality. This printer model also has a liquid crystal display (LCD) that measures about 1.9 inches of display component. This component is also susceptible to a touchscreen and touchpanel. The power source for this printer in Taiwan is between 100-120V and between 220-240V for other countries at 50/60Hz frequency.

Physically, this printer has a width of 390 mm, a depth of 370 mm while the height is about 180 mm. The weight of this device, however, is about 7.8 kg while the noise during operations is never above 50 dB. The temperature range during activities is between 10 and 330C while the best print quality is between 20 and 330C. Concerning humidity, the acceptable range is between 20 and 80% without condensation. Download Brother MFC-J415w driver from Brother website

Primary objective of this website is to offer easiest way of downloading a printer driver. Therefore, if you know on which OS you want to install your printer, then select that OS from our list and download the Brother MFC-J415w driver associated with it.

You must not undermine the importance of installing your new printer driver on a clean computer. By clean computer, we mean a computer where all the unnecessary and old drivers have been properly uninstalled to minimize the chances of driver conflicts.

We are an independent website and is not associated with any brand unless specified. All brand names, trademarks, images used on this website are for reference only, and they belongs to their respective owners. We disclaim any ownership, rights of such third-party products or copyright material unless otherwise specified. We also do not provide any kind of paid support. If you have any question feel free to contact us. Read our full disclaimer.

The following sections provide an explanation for each of the headings in the printer tables provided in the above documents. Click on the arrow in front of any section to read the explanation. The headings are Printers, Printer Data Stream, Host-Based or Windows Only, PDT File for PC5250, MFRTYPMDL for HPT, LPR, PJL, SNMP, and IPP.


Printers

The Printers column contains the name of each printer, or printer series. The printers are grouped by type of printer (for example, laser printers, color laser printers, ink jet printers, dot matrix and line printers, and multi-function printers) and are generally listed in ascending order. An attempt is made to have an entry for each ASCII printer from a particular manufacturer, whether they are currently marketed by that manufacturer or not.


Printer Data Stream

The Printer Data Stream column lists the printer data streams supported by each particular printer. If the printer lists more than one data stream, you can look across the table for each data stream to see how it is supported by PC5250 Printer Definition Table (PDT) Files, Host Print Transform (HPT), Remote Output Queues, *LAN 3812 PJL device descriptions, *LAN 3812 SNMP device descriptions, and *LAN 3812 IPP device descriptions. Support for these can differ depending on the data stream.

Some popular printer data streams include:AFP/IPDSThe term AFP/IPDS refers to the Advanced Function Printing and Intelligent Printer Data Stream printer languages from IBM. Printers that use these printer data streams can be configured using a *LCL or *RMT IPDS device description if they are twinax attached, or using a *LAN IPDS device description if they are LAN attached using the appropriate built-in print server from IBM or InfoPrint Solutions Company. Printers that use these printer data streams cannot be configured using a Remote Output Queue, *LAN 3812 PJL, SNMP, or IPP device description, or a PC5250 printer session unless the printer also supports a non-IPDS printer language such as HP PCL5e, HP PCL6, IBM PPR, or Epson ESC/P2.Code VThe term CODE V refers to a printer language from IBM that supports printing graphics and bar codes on certain printers. Printers that use this printer data stream will work with Host Print Transform (HPT) and might work with a PC5250 Printer Definition Table (PDT) file.EPL
EPL1
EPL2The terms EPL, EPL1 and EPL2 refer to the Eltron printer languages. EPL1 is an escape sequence based language that is used to talk to the older LP2022/LP2042 printers. EPL2 is a text based language that uses all keyboard accessible characters to communicate with all other Eltron label printers. These printer languages are not supported by Host Print Transform (HPT), but HPT should pass the EPL1 data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST). It is unknown at this time whether HPT will pass the EPL2 data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).EPL emulationThe term EPL emulation refers to an emulated version of the Eltron printer language from Eltron and Zebra Technologies. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the EPL data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).Epson ESC/P2The term Epson ESC/P2 refers to the ESC/P2 printer data stream. ESC/P2 was developed by Epson, but is used by a number of other printer manufacturers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers.Epson ESC/POS
Epson ESC/POS emulationThe terms Epson ESC/POS and Epson ESC/POS emulation refer to a version of the ESC/P2 printer data stream specifically for Point-of-Sale (POS) or transaction printers. ESC/POS was developed by Epson, and it is used primarily, if not exclusively, in point-of-sale printers. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the ESC/POS data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).IBM PPDSThe term IBM PPDS refers to the IBM Personal Printer Data Stream. PPDS was development by IBM and was used in older IBM and Lexmark laser printers.IBM PPR
IBM PPR XL
IBM PPR XL II
IBM PPR XL III
IBM PPR X24
IBM PPR XL24The term IBM PPR refers to the IBM Proprinter data stream. IBM PPR was developed by IBM, but it is used by a number of other printer manufacturers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers. The XL designates wide-carriage printers, the II and III designate upgrades to the Proprinter data stream, and the 24 refers to the Proprinter data stream used for 24-pin printers.GDI
Host-based
Host-based (GDI)
Host-Based Printing Proprietary (GDI)
Windows GDIThe terms GDI, Host-based, Host-based (GDI), Host-Based Printing, Proprietary (GDI), and Windows GDI are generic terms that can refer to any Host-based or Windows-only printer, which use a proprietary printer data stream rather than an industry-standard printer data stream such as IBM Proprinter Data Stream (PPDS), Epson ESC/P2, HP Printer Control Language (PCL), or Adobe PostScript (PS). These printers support printing from Windows, and possibly from Macintosh or Linux, but will not print directly from IBM i, IBM i5/OS, IBM OS/400, UNIX or any other non-PC-based Operating System, even if the printers can be network-attached. Because these printers require a proprietary printer data stream, they will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.

Note: Configuring a PC5250 printer session without Host Print Transform (HPT) and without a Printer Definition Table (PDT) file is most likely to print successfully. However, you will not be able to print *AFPDS spooled files because that requires using Host Print Transform, and you will have limited control over the formatting of your output (including limited control over the font selection). Therefore, configuring to print to a Host-Based Printing, Proprietary (GDI), or Windows GDI printer is considered unsupported, as would printing to any other host-based printer.HP PCL3
HP PCL4
HP PCL5
HP PCL5c
HP PCL5e
HP PCL6
HP PCL6cThe terms HP PCL3, HP PCL4, HP PCL5, HP PCL5c, HP PCL5e, HP PCL6, and HP PCL6c refer to different versions of the HP Printer Control Language. PCL was developed by Hewlett-Packard (HP), but it is used by a number of other printer manufacturers including IBM Printing Systems and Lexmark. PCL3 is used in a number of HP DeskJet printers, PCL5c and PCL6c are often used in color laser printers, and PCL5e and PCL6 the often used in B&W or monochrome laser printers.PCL5c emulation
PCL5e emulation
PCL6 emulationThe terms PCL5c emulation , PCL5e emulation and PCL6 emulation refer to an emulated version of the Printer Control Language, but they might also be used when a printer uses true HP PCL support. PCL was developed by Hewlett-Packard (HP), but it is used by a number of other printer manufacturers including IBM Printing Systems and Lexmark.Adobe PostScript 2
Adobe PostScript 3The terms Adobe PostScript 2 and Adobe PostScript 3 refer to versions or levels of the Adobe PostScript printer language. PostScript was developed by Adobe, but is used by a number of other printer manufacturers, though typically in laser printers. The PostScript printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.PostScript 2
PostScript 2 emulation
PostScript 3
PostScript 3 emulationThe terms PostScript 2, PostScript 2 emulation, PostScript 3, and PostScript 3 emulation typically refer to an emulated version of the PostScript printer language, but they might also be used when a printer uses true Adobe PostScript support. The PostScript printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.PDF
PDF v1.2
PDF v1.3
PDF v1.4
PDF v1.5
PDF v1.6
PDF v1.7
PDF v1.x emulationThe terms PDF, PDF v1.2, PDF v1.3, PDF v1.4, PDF v1.5, PDF v1.6 and PDF v1.7, or PDF v1.x emulation, refer to the ability to directly print Adobe Portable Document Format (PDF) documents without using a Windows printer driver or converting the PDF document to an HP PCL printer data using Host Print Transform (HPT). PDF v1.2, v1.3, v1.4, and v1.5 refer to the PDF version supported by the printer firmware. If a printer supports direct PDF printing, then it generally supports the printing of *USERASCII spooled files containing PDF data through a *LAN 3812 printer device description, a Remote Output Queue, a PC5250 printer session, or using Binary FTP to send a PDF file stored in the Integrated File System directly to the printer TCP/IP address or host name. However, this is dependent on the version of PDF used to generate the *USERASCII spooled file or PDF file, as well as the PDF version supported by the printer firmware.PGL
IGP (PGL)The terms PGL and IGP (PGL) refer to the Printronix Graphic Language. PGL is not supported by Host Print Transform (HPT), but HPT should pass IGP/PGL-compatible data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).RPCS
Ricoh RPCSThe terms RPCS and Ricoh RPCS refer to the Refined Printing Command Stream (RPCS) printer language from Ricoh. This printer language is a MicrosoftWindows-optimized printer data language. Therefore, printers that use this printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file.XMLThe term XML refers to XML-Enabled Printing. XML is text-based, but it is unknown at this time whether Host Print Transform (HPT) will pass the XML data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).XHTML
XHTML-PrintThe terms XHTML and XHTML-Print refer to a member of the family of XHTML languages defined by the Modularization of XHTML [XHTMLMOD]. According to the W3C, XHTML is designed to be appropriate for printing from mobile devices to low-cost printers that might not have a full-page buffer and that generally print from top-to-bottom and left-to-right with the paper in a portrait orientation. XHTML-Print is also targeted at printing in environments where it is not feasible or desirable to install a printer-specific driver and where some variability in the formatting of the output is acceptable. XHTML will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.XPSThe term XPS refers to the XML Paper Specification, which is a specification for a page description language and a fixed-document format developed by Microsoft. It is an XML-based or XAML-based specification, based on a new print path and a color-managed vector-based document format which supports device independence and resolution independence. XML Paper Specification, or XPS, will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file.ZPL
ZPL IIThe terms ZPL and ZPL II refer to different versions of the Zebra Programming Language from Zebra Technologies. These printer languages are not supported by Host Print Transform (HPT), but HPT should pass the ZPL and ZPL II data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).ZPL emulation
ZGL
ZGL (Zebra ZPL emulation)The terms ZPL emulation, ZGL and ZGL (Zebra ZPL emulation) refer to emulated versions of the Zebra Programming Language from Zebra Technologies. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the ZPL data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).
Note: If the printer tables refer to any printer data streams other than the ones listed above, then an explanation of those data streams will be included at the bottom of the printer tables.


Host-Based or Windows Only

The Host-Based column (formerly called the Windows Only column) shows if a specific printer is a host-based printer. The term Windows Only printer means that the printer was designed to be used only on a PC running a version of Microsoft Windows and was also generally designed to be used in a home or small office environment rather than in a networking environment. The term host-based printer expands this to refer to any printer that relies on the processing power of the host computer to generate printable pages; for example, if the host computer is running one of the versions of Microsoft Windows, Linux, or Macintosh operating system. The term Windows Only printer is becoming somewhat obsolete because newer printers that fit this category often come with printer software and printer drivers that allow them to be used on Apple Macintosh computers and PCs running one or more versions of the Linux operating system. However, the term Windows Only printer will often continue to be used to describe host-based printers.

Because they rely on the processing power of the host computer, host-based printers do not need a powerful processor of their own and, therefore, they tend to be less expensive than conventional printers. However, because they share the computer's processor, they might be slow and might slow down other tasks running on the computer. Host-based printers typically use a proprietary printer data stream rather than an industry-standard printer data stream such as IBM Proprinter Data Stream (PPDS), Epson ESC/P2, HP Printer Control Language (PCL), or Adobe PostScript (PS).

Because they use a proprietary printer data stream, they do not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file. Because they will not work with HPT, they also will not work to print *AFPDS spooled files through the AFPDS-to-ASCII Transform code within HPT. The only way to get a host-based printer to print IBM i family spooled files is to attached it to a host computer and then use printer emulation software, such as a PC5250 printer session, to print the spooled file through the host-based printer driver.


PDT File for PC5250

The PDT File for PC5250 column lists the name of a Printer Definition Table (PDT) File that can be used when configuring a Personal Communications 5250 (or PC5250) printer session.

Personal Communications 5250 (PC5250) started shipping new PDT files starting in V5R3M0 IBM iSeries Access for Windows. PDT files listed in lowercase characters are shipped with V5R3M0 iSeries Access for Windows and above (for example, hppcl5.pdt), while PDT files listed in UPPERCASE characters are shipped with V5R2M0 iSeries Access for Windows and below (for example, HPLJ4.PDT). For more information on PDT files, including a list of all PDT files available through iSeries Access for Windows, or to get the older PDT files on a PC running V5R3M0 iSeries Access for Windows or higher, please refer to the following document:

N1019626: List of Printer Definition Table (PDT) Files for Use with PC5250

For information on configuration and limitations of PC5250 printer sessions, with or without a PDT file, please refer to the following document:

N1018716: System i Access for Windows: Configuring a PC5250 Printer Session


MFRTYPMDL for HPT

The MFRTYPMDL for HPT column lists the Manufacturer Type and Model (MFRTYPMDL) setting that can be used with Host Print Transform (HPT) to select the appropriate data stream for that printer. This can apply to use with a PC5250 printer session as well as a Remote Output Queue, a *LAN 3812 PJL device description, a *LAN 3812 SNMP device description, or a *LAN 3812 IPP device description.

Note: A setting of QWPDEFAULT refers to setting the manufacturer type and model (MFRTYPMDL) parameter to *WSCST, *WSCSTLETTER, or *WSCSTCONT132, and then setting the workstation customizing object (WSCST) parameter to QWPDEFAULT in library QSYS. This special workstation customizing object causes Host Print Transform to send plain ASCII text without any printer controls, such as page size, LPI, CPI, font, print quality, and so on.

For more information on using Host Print Transform (HPT) with various ASCII printers, please refer to the following documents:

N1019698: Printer Model Settings for Host Print Transform (HPT)
N1019470: Using Host Print Transform (HPT) with a PC5250 Printer Session at V5R1M0 and Above


LPR

The LPR column shows whether a Remote Output Queue or the Send TCP/IP Spooled File (SNDTCPSPLF or LPR) command can be used to print to this printer when directly connected to the LAN. Support for printing using the TCP/IP Line Printer Requester (LPR) and Line Printer Daemon (LPD) protocols is available in the base code for R230 OS/400 and above for the SNDTCPSPLF and LPR commands, and in the base code for R310 OS/400 and above for Remote Output Queues.

Support for Remote Output Queues, as well as the SNDTCPSPLF and LPR commands, is largely dependent on the internal network interface card (NIC) or external print server used with the printer. Therefore, this column is as much of a statement about the NIC or print server typically shipped with the printer than it is about the printer itself. If it is unclear whether the NIC, print server and/or printer supports LPR/LPD, contact the manufacturer.

This field can have one of the following settings:YLPR/LPD can be used to print to this printer when directly connected to the LAN, provided the print server supports LPR/LPD.NLPR/LPD cannot be used to print to this printer when directly connected to the LAN. ?Not enough is known about this printer, the network interface card (NIC), or the external print server typically shipped with the printer to know whether LPR/LPD will work or not.For more information on Remote Output Queues, please refer to the following documents:

N1010090: Configuring a Remote Output Queue (RMTOUTQ)
N1019443: Configuring a Remote Output Queue (RMTOUTQ) to a Label or Receipt Printer
N1018931: Configuring a Remote Output Queue (RMTOUTQ) to a Windows Print Queue
N1010172: Recommended Remote Printer Queue Values for Remote Output Queues (RMTOUTQs)
N1019579: Configuration Settings and Error Messages for Remote Output Queues (RMTOUTQs)
N1019659: Capabilities and Limitations of Remote Output Queues (RMTOUTQs)
N1019713: Using Host Print Transform (HPT) with a Remote Output Queue (RMTOUTQ)

The TSPRWPR exit program allows a user to print a specific page range when using a Remote Output Queue that is configured with a connection type of *IP or when using the Send TCP/IP Spooled File (SNDTCPSPLF or LPR) command. For more information on the unsupported TSPRWPR remote writer page range support exit program, please refer to the following document:

N1019686: TSPRWPR Remote Writer Page Range Support Exit Program

The TSPLPRD exit program is an unsupported utility that can be used to configure a *LAN 3812 printer device description to send spooled files to an ASCII printer using LPR/LPD. Remote Output Queues also send using LPR/LPD, but the TSPLPRD exit program uses a printer writer, rather than a remote writer. For more information on the unsupported TSPLPRD LPR print driver exit program, please refer to the following documents:

N1019586: Configuring a *LAN 3812 Device Description that Uses the LPR Print Driver (TSPLPRD) Exit Program
N1019003: Capabilities and Limitations of *LAN 3812 Printer Device Descriptions


PJL

The PJL column shows whether a *LAN 3812 PJL device description can be used to print to this printer when directly connected to the LAN. The term PJL refers to the HP Printer Job Language. PJL allows for two-way communication with the printer when attached to the LAN using a print server that also supports bidirectional PJL. Support for the PJL print driver is available in the base code for R410 OS/400 and above, and was added to R370 OS/400 through PTFs.

Support for the PJL print driver is largely dependent on the internal network interface card (NIC) or external print server used with the printer. Therefore, this column is as much of a statement about the NIC or print server typically shipped with the printer than it is about the printer itself. If it is unclear whether the NIC, print server, or printer supports PJL, contact the manufacturer.

This field can have one of the following settings:YA *LAN 3812 PJL device description can be used to print to this printer when directly connected to the LAN, provided the print server supports bidirectional PJL.NA *LAN 3812 PJL device description cannot be used to print to this printer when directly connected to the LAN. This is commonly found in dot matrix (or line) printers, ink jet printers, or older laser printers that do not support the HP PCL5e printer language.?Not enough is known about this printer, the network interface card (NIC), or the external print server typically shipped with the printer to know whether a *LAN 3812 PJL device description will work or not.For more information on *LAN 3812 PJL device descriptions, please refer to the following documents:

N1010134: Configuring a *LAN 3812 PJL Device Description
N1019689: Recommended PJL Port Number Values for *LAN 3812 PJL Device Descriptions
N1019652: Configuration Settings and Error Messages for *LAN 3812 PJL Device Descriptions
N1019003: Capabilities and Limitations of *LAN 3812 Printer Device Descriptions
N1010288: Using Host Print Transform (HPT) with a *LAN Device Description


SNMP

The SNMP column shows whether a *LAN 3812 SNMP devic