Autronic Mistral 2 Software Download

0 views

Skip to first unread message

Message has been deleted

Adrian Rocher

unread,

Jul 14, 2024, 2:04:24 AM7/14/24

to armergani

Autronic Mistral 2 Software Download - How to Install and Use the LPG Diagnostic Tool

If you are looking for a reliable and easy-to-use software for diagnosing and tuning your LPG system, you might want to consider the Autronic Mistral 2 software. This software is compatible with various LPG controllers from Autronic, such as the Mistral II, EasyJet, and Easylambda. In this article, we will show you how to download, install, and use the Autronic Mistral 2 software for your LPG system.

autronic mistral 2 software download

Download File https://bytlly.com/2z0Mkq

How to Download the Autronic Mistral 2 Software

The Autronic Mistral 2 software is available for free on the official website of Autronic. You can also find it on some other websites that offer LPG diagnostic software , but we recommend that you download it from the original source to avoid any potential issues. To download the Autronic Mistral 2 software, follow these steps:

Go to the [downloads page] of Autronic.

Scroll down to the section "SMC & SM2 FAMILY AUTOTUNE SOFTWARE (DOS GRAPHICS VERSION)" and click on the link "v336auto DOWNLOAD 654KB".

Save the file "v336auto.exe" to your computer.

Run the file and follow the prompts to extract the files to a folder of your choice.

Congratulations, you have successfully downloaded the Autronic Mistral 2 software. Now, let's see how to install it on your computer.

How to Install the Autronic Mistral 2 Software

The Autronic Mistral 2 software is a DOS-based program that requires a special interface cable to connect your LPG controller to your computer. The interface cable is a USB device that has a serial port on one end and a connector for your LPG controller on the other end. You can buy this cable from Autronic or from some online shops that sell LPG diagnostic tools. To install the Autronic Mistral 2 software, follow these steps:

Connect the interface cable to your LPG controller and to a USB port on your computer.

Install the drivers for the interface cable. You can find them in the folder where you extracted the Autronic Mistral 2 software files. Look for a file named "FTDI_Setup.exe" and run it. Follow the instructions on the screen to complete the installation.

Open the folder where you extracted the Autronic Mistral 2 software files and look for a file named "ECUCAL.EXE". This is the main program that you will use to diagnose and tune your LPG system.

Create a shortcut for this file on your desktop or in your start menu for easy access.

Congratulations, you have successfully installed the Autronic Mistral 2 software. Now, let's see how to use it to diagnose and tune your LPG system.

How to Use the Autronic Mistral 2 Software

The Autronic Mistral 2 software is a powerful tool that allows you to monitor and adjust various parameters of your LPG system, such as fuel mixture, ignition timing, lambda sensor feedback, injector pulse width, and more. You can also view diagnostic codes, clear errors, and perform tests on your LPG system components. To use the Autronic Mistral 2 software, follow these steps:

Start your engine and let it warm up.

Run the ECUCAL.EXE program from your shortcut or from the folder where you installed it.

Select your LPG controller model from the list. For example, if you have a Mistral II controller, select "Mistral II".

Select the communication port that corresponds to your interface cable. For example, if your interface cable is connected to COM1, select "COM1".

Click on "Connect" to establish communication with your LPG controller.

You will see a main screen with various tabs and buttons that allow you to access different functions and settings of your LPG system. You can use the mouse or the keyboard to navigate the program.

Explore the different tabs and buttons and see what they do. You can find more information and instructions in the user manual that is included in the folder where you installed the Autronic Mistral 2 software. Look for a file named "Mistral II Manual.pdf" and open it with a PDF reader.

Make any changes or adjustments that you want to your LPG system. Be careful not to change anything that you are not sure about, as this may affect the performance or safety of your LPG system. Always consult the user manual or a professional before making any changes.

When you are done, click on "Disconnect" to end communication with your LPG controller.

Exit the program and disconnect the interface cable from your LPG controller and from your computer.

Congratulations, you have successfully used the Autronic Mistral 2 software to diagnose and tune your LPG system. We hope that this article was helpful and informative. If you have any questions or feedback, please feel free to contact us.