List of parts for Pebble boards (some minor revisions)

[Luke Weston]

FYI.




Resistors
---------

(use 1/2 W 1% metal film for fixed resistors, or 5% 1/4 W carbon film)

1 x 39 k
1 x 22 k
1 x 4.7 k
2 x 100 R
2 x 100 k
5 x 10 k

1 x 10 k pot
1 x 10 k trimpot

Capacitors
----------

1 x 10 uF 16 V electrolytic capacitor, 2.54 mm lead pitch
2 x 100 nF monolithic capacitor, 2.54 mm lead pitch

Semiconductors
--------------

1 x 3 mm LED, green
1 x 3 mm LED, red
2 x 1N5819 diodes, 1N4004 are also acceptable as an alternative.
1 x LDR
1 x DS18B20 IC
1 x 4094 IC
1 x LD1117V33, TO-220 package
1 x XBee module (optional)
1 x Arduino Duemilanove (or similar)(not included with kit)

Misc.
-----

4 x momentary tactile pushbutton switch
2 x reed relays, DIP-14 form factor
2 x 10-pin 2 mm pitch female header sockets to suit Xbee
1 x 6-pin right angle 0.1" Molex KK style male header connector
1 x 16-pin IC socket
2 x 14-pin IC sockets (optional, for reed relays)

1 x 40-way 0.1" female pin header strip, cut up into 2 x 16-pin pieces
(Save the remaining 6-pin pieces for making Aiko gateway boxes or
something...)

1.5 x 40-way 0.1" header pin strips (60 pins total)
(Break apart into 2 x 16 for LCD, 2 x 8 plus 2 x 6 for Arduino)

[Mitch Davis]

On Thu, Nov 26, 2009 at 1:01 PM, Luke Weston <reindeer...@gmail.com> wrote:
> FYI.
>
> Resistors

I will feed this into the Pebble Parts Purchasing II spreadsheet.

Mitch.

[Vik Olliver]

Would it help for someone in NZ to stock kits, Arduinos etc.? This can
be arranged, I think.

Vik :v)

[Luke Weston]

A (significant) omission from the above list is the LCD module.