forrt1: error <63>: output conversion error, unit 28,

Hoàng Bùi Huy

unread,

Sep 6, 2016, 11:33:53 PM9/6/16

to ArcSWAT

when i run the model, (I run 11 years) . the model run ok in 3 years, after that begin the 4th year i get this error " forrt1: error <63>: output conversion error, unit 26, file directory\Scenarios\Default\TxtInOut\output.std "

forrt1: error <63>: output conversion error, unit 28, file directory\Scenarios\Default\TxtInOut\output.std

forrt1: error <63>: output conversion error, unit 31, file directory\Scenarios\Default\TxtInOut\output.std .

But in the 10th years, it run ok, then 11th years ,it get that error. But the model report "simulation run successful"

How can i fix this errrr. thanks

Cva Shrestha

unread,

Sep 9, 2016, 2:06:19 AM9/9/16

to ArcSWAT

So far as i know
Check your meteorological data. some of temperature day or precipitaion may be wrong... like rain is over 1000mm a day..or sth like that..
hope it helps.

Thanks
Shiva

Lijuan Wang

unread,

Sep 25, 2021, 11:36:23 PM9/25/21

to ArcSWAT

Hi Serif,

I met the same problem. Did you solve this problem? could you help me ?

Nancy B. Sammons

unread,

Sep 27, 2021, 10:37:09 AM9/27/21

to Lijuan Wang, ArcSWAT

This usually means that an output variable got too large for the format specified in the model. Often times, users can go to the end of the file (output.std, in this case) and you will see a string of ‘****’, which is the output variable in question. If it is still not clear what the problem is, please send me your current txtinout directory, so I can take a look.

Nancy

--
You received this message because you are subscribed to the Google Groups "ArcSWAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arcswat+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/arcswat/d119ecc4-23f1-4110-95e8-a4b3a6524fden%40googlegroups.com.

Reply all

Reply to author

Forward