arcol_hu

wbr...@gmail.com chromed mini hyena 5mm hole -- Walter Brokowski Mechanical Motion Technologies LLC

Hail the Hyenas 2015-10-23 21:08 GMT+02:00 Walter Brokowski <wbr...@gmail.com>: I just got the

Yeah definitely...it happened to me too, with both my resistor (which is how i found out it needed to

a) That's a really nice idea in my opinion b) Not as big a deal to me c) Yes, because I'd

Hi, > Alternatively, buy a known-to-be-working integrated board. +1 Megatronics 2.0 and Rambo 1.2

I too have a broken dresser. I am an amateur at CAD. Thought I would start from your work. -Patrick

Hi, I have contacted you via private email. Laszlo On Sun, Mar 2, 2014 at 9:05 PM, kv <kok.vid009@

The crappy filament I have is about $3 USD / kg. Even an acetone soak isn't enough to unclog it,

I get good results on the Arcol v4, 0.5mm drill, with natural ABS at .127 layer heights. On Tue, Jan

lol, sorry for the spam guys, my bad! On Fri, Jan 3, 2014 at 12:16 PM, Laszlo KREKACS <list@arcol.

stuff arrived! On Sat, Nov 23, 2013 at 2:35 PM, Nicolas Arias <nico...@gmail.com> wrote: >

Hi, It is not strictly necessary, in fact I have sold for two years without it. But for a hotend

Hi, On Fri, Nov 22, 2013 at 7:21 AM, Matej Rozman <gotovi....@gmail.com> wrote: > About

Hi, I always wanted to have shipped hex keys along with my products, since some of it has M3

iv been using this pulleys (the small ones) for almost 3 weeks on one of the printers and i can feel

OK understood Thank you very much

Robert, You could repair it by adding a wrapping of "Rescue tape" - http://www.acehardware.

Nicolas, I will test the PLA filament as soon as I can. Still it is at least a week ahead to be able

Hi, Took longer, then expected, but here we go, the Arcol.hu v4 hotend for Rapman is ready. I

On Monday, 16. September 2013. at 10:19, Laszlo KREKACS wrote: To say the truth my hotend selling

Yeah.. the magnetic ball joint is a biggie. It's a recent development, but looks to be a solid

Hi, Its v4.0.1 - v4.1.1, with the firecement version, for thermistor info look up here: http://wiki.

I'm building a new printer, a kossel. and I'm gonna need some of these pulleys and bearings.

+1 for the "prototype lucky bag". I love the idea. 2013/8/25 Kyle Kenney <dudlsack@gmail

On Aug 24, 2013, at 1:13 PM, nico...@gmail.com wrote: > Thermal protection maybe? If you're

Hi, Just for a little headsup, the chrome version of the hyena family is up on the webshop.

My husband and I do a lot of buying and selling on eBay, but we've rarely had a problem that

Hi, When it chewes what are the temp of the heatsink? It is pretty much a good indicator if

Hi, Post me a photo, I think is enough. Best, Laszlo On Wed, Jul 24, 2013 at 11:36 AM, Kyle Kenney