Pre configured RaspBian Jessie lite image including APRX

[OZ1EKD]

Hi Group,

I just want to share that I have made it really easy to make a digipeater with a Raspberry PI.
I have taken the lite image from https://www.raspberrypi.org/downloads/raspbian/ and basically just configured the serial port and installed APRX 2.9.0

All that has to be done is described here: https://www.kissoz.dk/digi-igate/rpi-digipeater, including a link to the recipe howto do it yourself
Allthough I made to use with the KissOZ HW V4rpi it can of course be used with any TNC device that uses the GPIO serial port out of the box....

To get the image you will have to contact me :)

73 OZ1EKD

[Francisco Jiménez-Martín Sánchez]

Thank you for the superb job!

 

Greetings from Spain!

 

Fran EA1JM

--
You received this message because you are subscribed to the Google Groups "Aprx software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to aprx-softwar...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Kevin Hedgepeth]

I would be interested in receiving the image for APRX on the PI.  I am using a TNC-Pi and the digi worked for a while.  Then the SD card must have burped because the serial port would not initialize.  I had to rebuild the image and write it to the SD card to get the Serial port to work.  Now the TNC-Pi seems to be deaf.  I cannot get it to decode anything.  I have a copy of your APRX.Conf and will compare to mine to look for errors.  I would also like to send the CONF file to you in .txt format so that you could look for problems.

seven three de Kevin/NB7O
Hermiston, Oregon, U.S.A.