ADSB targets in MSL

[Larry Larson]

According to Stratux, ADSB data is MSL. Targets on AvareX are displayed AGL. 

Is there a way to change it? 

Ideally +/- altitude would be preferred.

[Larry Larson]

According to the manual...

"Avare-style simple traffic dots with a 1-minute projection line drawn in the direction of travel. Cyan circle (with black outline) for threat traffic (advisory or resolution alert). Each dot is annotated with a relative flight-level offset, vertical trend arrow and callsign."

Yesterday's flight, all the traffic hits were displayed with AGL altitude including mine. 

Thanks in advance

LL

--
You received this message because you are subscribed to the Google Groups "Apps4Av Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to apps4av-foru...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/apps4av-forum/da28b8c4-380b-4fd1-84a2-acdb52c2e118n%40googlegroups.com.

[Jeffrey Ross]

Targets in avarex & avare are displayed -/+ you altitude in hundreds of feet

Greetings from OSH 

Jeff

Sent from my cell phone 

--

[Rich Klarich]

KOSH Fik Arrival feedback-

My EFIS on 2nm scale was key to smokey MVFR arrival.  Avare legacy and X were less at a glance S.A. filling. 70nm at 90kias at 1NM trail....

--

[Jeffrey Ross]

Avare(X) will show targets as pressure altitude if you do not have a GPS reference on you ADS-B in device, eg stratux

Jeff

Sent from my cell phone 

-------- Original message --------

From: Larry Larson <wire...@gmail.com>

Date: 7/22/26 1:40 PM (GMT-06:00)

To: Apps4Av Forum <apps4a...@googlegroups.com>

To view this discussion visit https://groups.google.com/d/msgid/apps4av-forum/CANiEHLW5XsE_V5eEbxA8eJTBygCLxUM%3D%2B9ow0ciM73D4v_NTBQ%40mail.gmail.com.